Re: How to make GOLD ?Simpler Recipe
March 26, 1999 at 08:29:45
In Reply to: How to make GOLD ?
posted by Mike (AZ) on March 25, 1999 at 15:47:26
I discovered a much simpler recipe for doubling the PPM of gold in liquid. Please guard the following with your life:
Preparation: (1) Obtain .1 Gram fine gold (This can sometimes be combed from the beards of prospectors with short-handled metal detectors.)
(2) Prepare 10,000 Gram solution of Branch H20 by pouring into large metal bucket.
(2-A) (A side solution of 100 Grams Branch H20 and 50 Grams J. Daniels should be prepared in clear beaker with 28 grams H20 at 0-degrees C. added at scientist's option.)
(3) Heat 10,000 Gram solution Branch H20 to at least 220-degrees F. (3-A) When target temp. achieved, add fine gold. (3-B) Repeat step 2-A.
(4) Continue heat application to Gold-Branch H20 solution until volume is reduced by 10%. Repeat step 2-A.
(5) Continue heat application and monitor volume reduction by 10% increments. As each 10% increment reduction is achieved, celebrate by repeating step 2-A.
(6) When original 10,000 Gram Branch H20 is reduced by 50% (5,000 Grams) remove heat. Repeat step 2-A.
(7) Carefully separate original .1 gram Gold from remaining Branch H20. Repeat step 2-A except forget the 100 Grams Branch H20 if you feel like it.
(8) Find your calculator. Ask wife where she put it last. Whatever. Use pencil and paper if necessary. You should arrive at following calculated results, more or less.
Original Volume Branch H20= 10,000 Grams
Original Volume Gold= .1 Gram
This equals approx. 10 Parts Per Million(PPM) Gold
At end of experiment, using same math, you have achieved an increase in gold content, i.e., you have doubled the PPM Gold to 20 PPM.----And if you did it right, your BAC should be at least .16----DO NOT DRIVE. Happy Science, y'all.
 Follow Ups:
Post a Followup
This forum has been discontinued - please use our new forum
Comments:
|
