Follow Ups - Post Followup - Current Messages - FAQ - Your Ad Here

Re: 4" Keene triple box vs 3" Proline straight
April 06, 2000 at 14:22:56
In Reply to: Re: 4
posted by RockChuk on April 05, 2000 at 23:46:59

Yeah, I agree, I learned a lot from that little demo. If somebody had just told me, I probably wouldn't have believed it. You touched on the other thing it could be, the Keene would get plugs in the jet which were difficult to get out. The Proline had a few plugs too, but these were always hose plugs and a knock with the rubber hammer was all that took to free up the plugs. So yes, the Keene was down a lot more. You've probably hit upon the main answer. I'm not knocking Keene either, I just put this up as an observation and wondered if anybody else out there had seen a smaller sized dredge outworking a bigger one. You have, and some others have emailed me, so I can cancel the shrink trip since I did in fact, see what I saw.

Matt Mattson http://www.treasuresites.com


upFollow Ups:


upPost a Followup


Comments:



up
Posted By: hern-136.352.com - 209.4.232.136 - April 06, 2000 at 14:22:56