Butch In SC
Tenderfoot
- Apr 15, 2012
- 7
- 0
- Detector(s) used
-
Fisher F70 w/SunRay FX-1
Tesoro Sand Shark w/10.5" coil
- Primary Interest:
- Metal Detecting
I finally got to the beach with my newly-acquired F70.....Its quite different from my old CZ70, but I started out using the default Program 1 settings to get used to the response, etc.
I did manage to find a few clads the first time out, but really don't have a lot of confidence in the default settings for damp, packed beach sand. With minimal Ground Balancing over salt, I can't help but think there must be a better set of parameters.
Just wondering if any of you out there with this machine have had good results on East Coast beaches, and if so, if you'd mind sharing your settings? Thanks, Butch.
I did manage to find a few clads the first time out, but really don't have a lot of confidence in the default settings for damp, packed beach sand. With minimal Ground Balancing over salt, I can't help but think there must be a better set of parameters.
Just wondering if any of you out there with this machine have had good results on East Coast beaches, and if so, if you'd mind sharing your settings? Thanks, Butch.
Upvote
0
