Tesoro Sand Shark Coil Cover..

[jdiggs_treasure]

whats up tnet..

quick question..

my coil cover seems to be alittle loose on my sand shark and was wondering if i could use some double sided tape to keep it nice and snug?.. would that harm the coil at all? is there something other then double sided tape i could use? any recommendations/suggestions would be awesome..

thanks in advance..

 

Amazon Forum Fav 👍

Treasure of Victoria Peak - Grab it through Amazon!

[wrecker]

You can use a bit of silicone. 3-4 little beads/drops of silicone right at the edge of the coil cover should be enough. If some day you want to remove the coil cover you can still cut through the silicone with a fine blade.

 

[jdiggs_treasure]

maybe i will give that a shot.. any other suggestions? so the double sided tape thing would be no good? does it have to be a certain type of silicone?

will something like aqua seal do the job? i still want to be able to take off the cover for cleaning purposes...

 

[Terry Soloman]

DON'T SILICONE ANYTHING!!!!!!!!!!!!! Just use two small pieces (1") of scotch tape on two sides of the coil cover, to the top of the coil. Works fine and you can easily remove the scuff cover for cleaning.

 

[jdiggs_treasure]

lol... so u dont recommend using silicone?! hahaha.. i wont use it, thanks for the heads-up...just regular scotch tape or do u mean double sided tape? just wanted to clarify before i do anything..

 

[ron lord]

I use tie straps ,they work Great.

 

[jdiggs_treasure]

i was thinking about the zip tie thing too.. i will probably try that and or the double sided tape to see what works best for me..
thanks for the ideas and suggestions.. HH

 

[Terry Soloman]

lol... so u dont recommend using silicone?! hahaha.. i wont use it, thanks for the heads-up...just regular scotch tape or do u mean double sided tape? just wanted to clarify before i do anything..

Just good old Scotch tape!

 

[jdiggs_treasure]

thanks terry...

 

[Sandman]

As Terry says, just use tape to secure the loose cover so you can remove it easy for cleaning almost every day. The silicone on the edges gives you false hope that no black sand will get in the coil cover and it will mess you up with your thinking your good to go.

 

[jdiggs_treasure]

thanks sandman.. ive decided to try the tape thing for now... if that doesnt work then on to the zip ties...