CZ 20 replcement battery door dilema-HELP

GTzer

Sr. Member
Jan 24, 2013
309
66
DELCO, Pa
Detector(s) used
xTerra 705 & 6000 xl Pro,CZ 20
Primary Interest:
All Treasure Hunting
Got my replacement battery door for my CZ 20. One capture screw is slightly out of alignment. I can deal with that.

Main issue- there is a HEAVY duty plastic array inside of the replacement door which adds about ½ inch (compared to the original). This makes it so you cannot close the battery door.
Has anyone dealt with this problem or did the wrong part or what.


I only got it because the used CZ 20 I got had cracks that you could see light through. I repaired them but I don't trust that they wouldn't open up again.

Observation-under the foam pad of the original-it looks as though some one cut that same HEAVY duty plastic array down & covered it.

I got this at the end of July and still have not tested it in the water. Another wasted day.
Any INPUT-PLEASE.
 

Upvote 0

bigscoop

Gold Member
Jun 4, 2010
13,373
8,689
Wherever there be treasure!
Detector(s) used
Older blue Excal with full mods, Equinox 800.
Primary Interest:
All Treasure Hunting
Call Fisher - ask to speak to Felex - explain your issue to him and he'll tell you what needs to be done.
 

DrJoePrime

Bronze Member
Sep 9, 2007
1,535
948
Long Beach, California
🏆 Honorable Mentions:
2
Detector(s) used
XP Deus, White's Surfmaster Dual Field, Tesoro Sand Shark, Garrett ATX
Primary Interest:
Beach & Shallow Water Hunting
If you got the replacement door from Fisher ... I'd go there and call them first.

I feel for your dilemma but unfortunately don't have a CZ 20.
 

OP
OP
G

GTzer

Sr. Member
Jan 24, 2013
309
66
DELCO, Pa
Detector(s) used
xTerra 705 & 6000 xl Pro,CZ 20
Primary Interest:
All Treasure Hunting
Thanks for the replies. Fisher is closed on Sat.
Had the car packed-just had to change the battery door and.............................
 

OP
OP
G

GTzer

Sr. Member
Jan 24, 2013
309
66
DELCO, Pa
Detector(s) used
xTerra 705 & 6000 xl Pro,CZ 20
Primary Interest:
All Treasure Hunting
Per Sandman-even if it says replacement for CZ 20--its a CZ 21 door. Dirty trick... but ocillating saw,nippers,dremel & sandpaper 3 hrs--it's a CZ 20 door.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Top