Straight Shaft the CZ20 & CZ21 Under the elbow

[guzz1]

Straight Shaft the CZ20 & CZ21 Under the elbow

Hey guys & Gals ,, The mail just came and dropped off my new ANDERSON Straight shaft .. What a sweet set up .. I converted the stock shaft to work the same way and what a huge difference . I know alot of you are anti Fisher BUT, I happen to like them . and you all know I have had a lot of the good ones, Excal and Sandshark ,,I still have my SOV Gt and its the best of the Fleet .That and my Cz 20.. anyway you CZ owners Check it out ... Guzz1

 

Amazon Forum Fav 👍

Minelab PRO-FIND 35 Waterproof Pinpointer Metal Detector for Experts with Tone ID & Adjustable Sensitivity - Grab it through Amazon!

[pistolpete]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Glad to see the shaft arrived ok Guzz. The new sure grip only has to be handtight, no tools! Pete

 

[EZrider]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Looks real good Guzz! Hey if you see Glenn take good care of him!

 

[JoeSWFla]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Nice Guzz.I liked my CZ20.I used it at times in the balanced position,but
found it hard to reach the knobs quickly.Liked to hunt in autotune,then
switch to disc to check the target.In regular position it was just a flick
of the thumb.Someone used to make a trigger set-up for under the rod
mount.Hunt in auto,pull the trigger to check in disc,then release and it
went back to auto.Cool set-up,but you had to mount the detector
backwards on the rod and remove the disc knob and attach the trigger
mechanism.Also be careful of setting the detector down in that configuation,
as it can scratch up the top(now bottom).Nice machine.Hope you make
many good finds.HH Joe

 

[guzz1]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

I'm gonna see glenn on the 30th. he's coming down to sarasota for the day ...Were gonna see if we can get him some florida gold to take back home with him guzz1

 

[DaChief]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

That looks pretty cool there Guzz. Makes a huge difference in the look compared to the high mounted stock shaft.

 

[guzz1]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

zero's out nice as well chief. guzz

 

[EZrider]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Guzz, is that the regular or extended setup? Did you order direct from Anderson or?

 

[guzz1]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Hey Ez its the regular. My contact is Pete at andersons,, Direct ..... its a sweet setup. guzz1

 

[EZrider]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

I really like it. I may just have to get one for my Tiger Shark.

 

[COTTON]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Looks good Guzz, Now go get in the water, an find something COTTON

 

[Goldiver]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Someone may have already mentioned this, but how does the lower shaft feel? On my CZ-21 with the stock shaft the lower part feels a little sloppy with the 10 1/2 inch coil, but I am tall and have to extend it most of the way out. I think they make it this way so the sand doesn't lock up the shaft on you as easily. Just curious.

Steve

 

[guzz1]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

i had to buy the lower stiff shaft from Anderson works great no slop... guzz1

 

[Goldiver]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

i had to buy the lower stiff shaft from Anderson works great no slop... guzz1

Thanks, thats what I needed to know. 8)

 

[guzz1]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Welcome Steve..... Guzz

 

[FloridaBill]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Hey that looks as good as my beachhunter 300 I know it will make a big difference for you good luck Gary

 

[guzz1]

Re: Straight Shaft the CZ20 & CZ21 Under the elbow

Hey MT minelab makes a nice Arm cuff.. Guzz

 

[eddiecurrent]

I wish they offered the mount by itself so I didn't have to purchase the $120 upper rod.
Maybe someday.

 

[penzfan]

Make one. I make and sell them for the Excal, Sandshark and Tigershark.

 

[eddiecurrent]

Well, I'll examine the mount under the cz20 housing...I'm good with electronics but my mechanical/spatial aptitude is limited. If it can be achieved with a couple of ss hose clamps or sisal twine, I should be able to do it, if it requires machining a plastic or metal planchet to spec within mm tolerance, i'm at a disadvantage.
But thanks for the encouragement and vote of confidence.