Ground Balancing..............Need Help ?

ToddB64

Sr. Member
Jan 7, 2007
418
73
Georgetown, Ohio, USA
Detector(s) used
Teknetics Gamma 6000,
Tesoro Bandido II µMax and
Compadre, White's Classic II,
Garrett Ace 250
Primary Interest:
Metal Detecting
Dear Friends,

Attached is a photo of a book I heartily recommend to anyone who has a metal detector with manual Ground Balance and is having some difficulty understanding what it does and how to set it properly.

The book is titled The Complete, Unabridged Zip Zip, authored by Larry Sallee. It was copyrighted 2004 and published by VENTURE WEST, Lake Havasu City, AZ, U.S.A. This book is a compilation (with updating) of two earlier books by Mr. Sallee Zip Zip, Mastering Your Metal Detector and Zip Zip, the Advanced Course.

Although the focus of the book is on locating natural gold, much of the information can be applied to metal detecting in general. For example, see the section under subtitle Ground Balance on page 29.

In addition, if you are a little confused about the proper order/sequence for setting Threshold, Sensitivity (Gain) and Ground Balance, look at the information under subtitle Threshold on page 20 and then the paragraph directly above the subtitle Ground Balance on page 29. Compare these two references and catch the inference in regard to the proper order of setting those three controls.

I think you will agree that the book was well worth purchasing.

HH.........ToddB64
 

Attachments

  • hpqscan0001.jpg
    hpqscan0001.jpg
    51.7 KB · Views: 297
  • hpqscan0001.jpg
    hpqscan0001.jpg
    51.7 KB · Views: 244

Top Member Reactions

Users who are viewing this thread

Top