Introducing the Gold Churn .

[AzViper]

Running wet would be the only way I would run the mixer. Also I would go DC and use a Pulse Width Modulation controller so that I can control the speed of the drum. Trying to control AC motor gets more involved due to having to control the frequency and voltage to reduce the RPM of an AC motor.

 

Amazon Forum Fav 👍

How to Research for Treasure Hunting and Metal Detecting From Lead Generation to Vetting - Grab it through Amazon!

[Hoser John]

Harbor Freight used to sell plastic hexagon style cement mixers which is what I used,paddles did not extend down to the very bottom so concentrated just fine. Like seeing all them prototypes as man alive I've had whole storage units full of them to keep for parts and remodels. GREAT welding for sure as so many totally screw up on al . Kudos-John

 

[jack outbush]

Harbor Freight used to sell plastic hexagon style cement mixers which is what I used,paddles did not extend down to the very bottom so concentrated just fine. Like seeing all them prototypes as man alive I've had whole storage units full of them to keep for parts and remodels. GREAT welding for sure as so many totally screw up on al . Kudos-John

Appreciate your kudos Hoser John ' even over the other side of the world I know who you are & your expertise

I tried other shapes in the early stages , ' didn't work like I wished because at that stage I didn't realise what was needed .
Design after design was made and testing to find what worked , I did check after all the information about drag & slump angles regarding dry material .
The one in the video works excellent ' but I now know how to make the next model perform as near to perfect as it is possible .

Cheers
Jack

 

[Hoser John]

FANTASTIC ATTITUDE AS TRY AND TRY AGAIN AS SUCESS IS NEVER EZ AND PERFECTION IS ALWAYS IN THE EYES OF THE BEHOLDER-respect-John

 

[rodoconnor]

Our greatest weakness lies in giving up. The most certain way to succeed is always to try just one more time. T.A. Edison Good luck Jack

 

[Hoser John]

But that was before Tesla kicked his butt with ac electricity..... John

 

[rodoconnor]

Yeah ,what a time that must have been . Messing around with electricity in it's infantcy

 

[AzViper]

Yeah but DC electricity is all around us, we can't live without it. Plus DC is better over long distances than AC due to voltage drop in an AC line.

 

[Hoser John]

Jack O n OZ-the more I see that video, the more I see ways of making that unit better. Will finish some drawings and send them to ya in a pm. Hope it helps, but first gotta go detecting today as rain YAHOO more rain coming for a few days so next week latest. Wish ya successs in this product developement.-John

 

[jack outbush]

Jack O n OZ-the more I see that video, the more I see ways of making that unit better. Will finish some drawings and send them to ya in a pm. Hope it helps, but first gotta go detecting today as rain YAHOO more rain coming for a few days so next week latest. Wish ya successs in this product developement.-John

Thanks very kind of you John , Iv'e been playing with churns all week
Hope you do OK detecting before the rain starts ' wish it would rain were I am .
Looking forward to see your drawings

Cheers
Jack .

 

[Hoser John]

Actually the rain helps my VLF machines righteously. I bag'm so rain stops nothing. Working on a mini prototype to test,will privately pm when done/working.Will tell even if it fails as even a failure is a success as what doesn't work is always as valuable as what does work. Tons a au 2 u 2-John

 

[jack outbush]

Actually the rain helps my VLF machines righteously. I bag'm so rain stops nothing. Working on a mini prototype to test,will privately pm when done/working.Will tell even if it fails as even a failure is a success as what doesn't work is always as valuable as what does work. Tons a au 2 u 2-John

Greetings HJ ,
Have some Tesoro machines also ( Tejon ' Vaquero ' Diablo uMax ) like them all , but on bad ground only the old Diablo shines .

I've built another version of the churn for faster processing speed , testing new types of internals to make it twice as fast yet still retain all fine gold .
Trying to make a dry unit that will work as good as a wet one

Be interesting to see what your fine mind comes up with

Cheers
Jack .

 

[johnnysau]

Wondering why we stopped in the middle of something good! Might be needing something similar in the future. johnnysau

 

[jack outbush]

Back again

Still making improvements to new designs , this model ( called a Jack Winder ) has a set of internal self adjusting directional spreaders that work both ways , speeds up the whole process .
Material needs to be half inch classified first .

 

[Goodyguy]

Back again

Still making improvements to new designs , this model ( called a Jack Winder ) has a set of internal self adjusting directional spreaders that work both ways , speeds up the whole process .
Material needs to be half inch classified first .

Love to see a video of it in action.

 

[jack outbush]

Love to see a video of it in action.

Thanks Goodyguy , that model although good has become redundant , just recently I've made a unit that can retain fine gold like wet systems & process material twice as fast , more testing to be done but it easy out performs all my previous designs .

jack