Deep Signals Trouble - Page 2
Welcome guest, is this your first visit?
Member
Discoveries
 
Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19
Like Tree33Likes

Thread: Deep Signals Trouble

« Prev Thread | Next Thread »
  1. #16
    Charter Member
    us
    Aug 2007
    Mn.
    Minelab E-Trac
    3,637
    1560 times
    Metal Detecting
    Banner Finds (3)
    I have had the 39 a few times and thought i was digging a silver dollar. Turns out to be a rusty tin can.
    Now i practice on a few coins like the silver dollar and pinpoint that coin and you will see the smaller pinpoint area of the coin and a larger area will be iron trash.
    vferrari and Normsel like this.

  2. #17
    us
    Sep 2012
    D'Iberville MS
    E-Trac Equinox 800 Equinox 600
    1,190
    802 times
    Metal Detecting
    Honorable Mentions (1)
    The story don't change. Guys are just trying to help and throw out possibilities.. I would be very skeptical about using a shovel in a park..

    When you get a really strong signal and it appears to be deep in most cases it's iron falsing or a can. Like others have said raise the coil and see if you still get a signal and if you do it's likely not silver or clad
    sprailroad and Larwar like this.


    I don't detect for the stuff I find, I detect for the stuff I haven't found.

    If I didn't find it I hope you did.


  3. #18
    Charter Member
    us
    Nov 2012
    Maryland
    XP Deus, Tesoro Cibola, Full sized shovel and a backhoe
    16,596
    30422 times
    All Types Of Treasure Hunting
    Banner Finds (8)
    Honorable Mentions (1)
    Most of my "huh?: signals like that wound up being a coin on edge on the side of the hole. Any deep iron I just went after and got.
    Last edited by smokeythecat; May 20, 2018 at 09:14 AM.

  4. #19

    Feb 2017
    4
    2 times
    All Types Of Treasure Hunting
    I also have had the problem with iron showing up in the 30's and not pinpointing correctly. I've found old rusty nails and large iron sometimes show up higher numbers and cant find them where i pinpointed.but i keep digging out further and it seem like the iron is pinpointing out further towards the edge of the coil. This is very rusted iron.
    But I have found three silver dimes near junk targets in a park I have detected before with no problems pinpointing

 

 
Page 2 of 2 FirstFirst 12

Sponsored Links

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Similar Threads

  1. AT Pro and deep signals
    By krazyace in forum Garrett
    Replies: 23
    Last Post: Jul 05, 2013, 08:33 AM
  2. signals trouble on my etrac
    By abcdefgh in forum France
    Replies: 9
    Last Post: Nov 28, 2011, 09:12 PM
  3. Trouble pinpointing signals.
    By philinchio in forum Metal Detecting
    Replies: 16
    Last Post: May 28, 2011, 06:40 PM
  4. DEEP SIGNALS WITH THE ACE 250
    By husker du in forum Garrett
    Replies: 10
    Last Post: Jun 20, 2008, 12:34 PM
  5. Do you dig deep signals?
    By free2Dtect in forum Metal Detecting
    Replies: 22
    Last Post: Feb 16, 2005, 01:46 PM
Powered by vBadvanced CMPS v4.3.0