CarsonChris
Sr. Member
- Feb 11, 2019
- 486
- 1,998
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Equinox 800, AT Pro
- Primary Interest:
- All Treasure Hunting
I installed the V2 update now the Nox won’t fully charge. Any ideas?
Charging issue after V2 update
- Thread starter CarsonChris
- Start date
Bayoutalker
Sr. Member
- Sep 30, 2012
- 360
- 326
- Detector(s) used
-
Garrett AT Pro
Minelab Equinox 800
- Primary Interest:
- All Treasure Hunting
No problem here. I've charged it 3-4 times.
WaterWalker
Hero Member
- Jan 31, 2007
- 525
- 674
- Detector(s) used
- Garrett (Infinium, ATPro, ATX), Minelab Excalibur, Tesoro Conquistador, Whites (Surfmaster PI, Quantum), JW Fisher 8X, DetectorPro Underwater 8", Minelab Equinox 800, Manticore, Pro-Find 35
- Primary Interest:
- Beach & Shallow Water Hunting
Clean the on both the control box and charging cable contacts with a soft cloth (with or without a bit of alcohol on the cloth). Then try to charge again.
- Jul 19, 2015
- 4,910
- 8,377
- Detector(s) used
- XP Deus with HF/x35 Coils and Mi6 Pinpointer/ML Equinox 600/800/ML Tarsacci MDT 8000 GPX 4800/Garrett ATX/Fisher F75 DST/Tek G2+/Delta/Whites MXT/Nokta Simplex/Garrett Carrot
- Primary Interest:
- All Treasure Hunting
Also do a full factory reset if you haven't done so since you updated.
Donut
Sr. Member
- Jan 25, 2010
- 392
- 334
- Detector(s) used
- Xterra 70 6" 7.5khz concentric 9" 7.5Khz concentric, 5x10 18.75Khz DD, 10.5 18.75Khz DD.
When you clean the magnetic terminals try using masking tape. Mine get covered with iron from beach sane all the time.
Doug
Doug
CarsonChris
Sr. Member
- Feb 11, 2019
- 486
- 1,998
- 🏆 Honorable Mentions:
- 1
- Detector(s) used
- Equinox 800, AT Pro
- Primary Interest:
- All Treasure Hunting
- Thread starter
- #6
Resolved after cleaning off grit on the back of the control unit! Thanks guys!
Top Member Reactions
-
2575 -
1138 -
1051 -
910 -
888 -
834 -
815 -
703 -
642 -
525 -
496 -
493 -
485 -
464 -
464 -
O
442
-
422 -
396 -
381 -
364
