Hinged head

Donut

Sr. Member
Jan 25, 2010
392
334
Coloma, Michigan
Detector(s) used
Xterra 70 6" 7.5khz concentric 9" 7.5Khz concentric, 5x10 18.75Khz DD, 10.5 18.75Khz DD.
I would like to see someone come up with a hinged bracket that looks professional that would mount between the shaft head bracket that would allow the head handle shaft to fold back the head into the arm cuff for travel with an spring type pill knob that would not be able to loose.
I've seen the a Russian video on one he made and someone else’s that folded to one side.
hopefully there will be some in the future.

Doug
 

vferrari

Silver Member
Jul 19, 2015
4,910
8,377
Near Ground Zero for Insanity
Detector(s) used
XP Deus with HF/x35 Coils and Mi6 Pinpointer/ML Equinox 600/800/ML Tarsacci MDT 8000 GPX 4800/Garrett ATX/Fisher F75 DST/Tek G2+/Delta/Whites MXT/Nokta Simplex/Garrett Carrot
Primary Interest:
All Treasure Hunting
I just loosen the lower shaft and rotate it to the side so I can stow the coil flat while the control head lies to side while in transit. Allowing it to fold forward is good, plus an adjustable/lockable handle angle could be good to relieve wrist fatigue in some cases.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Top