A Cool Question for the Minelab Safari

devldog

Silver Member
Mar 9, 2012
3,641
6,333
Georgia
Detector(s) used
Whites MXT ALL PRO, Minelab Safari
Primary Interest:
Relic Hunting
I have been searching and doing some research for a small coil for my Minelab Safari. I have narrowed my search down to 2 coils, either the Detech 4.5 x 7 Excelerator DD coil, or the Detech butterfly 8 x 6 DD coil. Do any Etra or Safari users have and use either of these coils and if so what are your thoughts. Either of these coils can be used on either the Etrac or the Safari. I could use some help he
re. I don't want to make a mistake. Any help would be most appreciated. Thanks
Spell check: A COIL Question
 

Last edited:

gunsil

Silver Member
Dec 27, 2012
3,863
6,204
lower hudson valley, N.Y.
Detector(s) used
safari, ATPro, infinium, old Garrett BFO, Excal, Nox 800
Primary Interest:
All Treasure Hunting
I run a SunRay 8" round DD coil on my Safari and I find it a very good set up. Round coils generally have a little better depth than elliptical coils if the elliptical coils are narrower than the round coil. I have found a 1 reale at 10" and a silver thimble close to 10". Safari is a silver sniffer for sure!! I also have a spare Minelab 7&1/2"round DD coil I might part with.
 

OP
OP
devldog

devldog

Silver Member
Mar 9, 2012
3,641
6,333
Georgia
Detector(s) used
Whites MXT ALL PRO, Minelab Safari
Primary Interest:
Relic Hunting
Thanks for the reply gunsil.
 

SD51

Silver Member
Aug 24, 2016
4,831
9,955
MI
Detector(s) used
E-TRAC
Primary Interest:
All Treasure Hunting
I have the Detech 8x6 on my E-TRAC and never remove it. Found this quarter at 10" with a nail next to it...

P8040089.JPG

P8040090.JPG
 

OP
OP
devldog

devldog

Silver Member
Mar 9, 2012
3,641
6,333
Georgia
Detector(s) used
Whites MXT ALL PRO, Minelab Safari
Primary Interest:
Relic Hunting
Beautiful Seated Quarter, Pre War too. It looks like the 8x6 coil paid
for itself pretty quick. Congrat's on a Great save and Thanks for your reply SD51.
 

Top Member Reactions

Users who are viewing this thread

Top