X-Post: Finds from an 1840's Trading Post site.

Iron Buzz

Bronze Member
Oct 12, 2016
1,722
2,347
South St Paul, MN
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus, Minelab Equinox 800
Primary Interest:
Metal Detecting
Upvote 0

Muddyhandz

Bronze Member
Jul 1, 2012
1,226
1,955
In da bush
Detector(s) used
Fisher's 1266X, 1270X & 1280X
Primary Interest:
All Treasure Hunting
1. Could be a chisel with broken tip. 2. Butt plate fragment later than a N.W. trade gun. 3. Lug from a cast iron cooking pot. 4. Hook. 5. Broken pulley. 6. Flattened-out musket shot.
All finds seem to fit the 1840's time frame well.
 

A2coins

Gold Member
Dec 20, 2015
33,807
42,606
Ann Arbor
🏆 Honorable Mentions:
3
Detector(s) used
Equinox 800
Primary Interest:
All Treasure Hunting
Cool find looks like a saddle part with the curly part bent a little
 

OP
OP
Iron Buzz

Iron Buzz

Bronze Member
Oct 12, 2016
1,722
2,347
South St Paul, MN
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus, Minelab Equinox 800
Primary Interest:
Metal Detecting
1. Could be a chisel with broken tip. 2. Butt plate fragment later than a N.W. trade gun. 3. Lug from a cast iron cooking pot. 4. Hook. 5. Broken pulley. 6. Flattened-out musket shot.
All finds seem to fit the 1840's time frame well.
That's one hell of a big flattened out musket shot!!
 

firemanphob

Bronze Member
Apr 8, 2018
1,080
2,023
Lanesville, IN
Detector(s) used
White Coin master 4000
Garrett AT PRO
Primary Interest:
All Treasure Hunting
that chisel looking thing could be a tamper for lead plumbing joints.
 

Last edited:
OP
OP
Iron Buzz

Iron Buzz

Bronze Member
Oct 12, 2016
1,722
2,347
South St Paul, MN
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus, Minelab Equinox 800
Primary Interest:
Metal Detecting
I've seen them flattened out to about 2"...........but, it could very well be something else!

Iowa Dale

I don't know why I didn't think to weigh it before, but it weighs 1.9 oz. / 54 grams (I guess that would be 833 grains?) if that helps.
 

OP
OP
Iron Buzz

Iron Buzz

Bronze Member
Oct 12, 2016
1,722
2,347
South St Paul, MN
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus, Minelab Equinox 800
Primary Interest:
Metal Detecting
that chisel looking thing could be a tamper for lead plumbing joints.
Granted, there is some possibility of cross-contamination at any site, but did they have plumbing in the 1840s?
 

Muddyhandz

Bronze Member
Jul 1, 2012
1,226
1,955
In da bush
Detector(s) used
Fisher's 1266X, 1270X & 1280X
Primary Interest:
All Treasure Hunting
Just weighed a large (52) calibre musket shot and it was around 32 grams. Can't tell from a picture but with the weight we can cancel that out.
Traders often made their own bales from scrap lead and some flat lead disks were made as gaming pieces.
 

Older The Better

Silver Member
Apr 24, 2017
3,142
5,848
south east kansas
Detector(s) used
Whites Eagle Spectrum
Primary Interest:
All Treasure Hunting
ImageUploadedByTreasureNet.com1567742981.975938.jpg
I’ve got a similar piece from a trade site I have dated to 1830-1840
 

OP
OP
Iron Buzz

Iron Buzz

Bronze Member
Oct 12, 2016
1,722
2,347
South St Paul, MN
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus, Minelab Equinox 800
Primary Interest:
Metal Detecting
View attachment 1750180
I’ve got a similar piece from a trade site I have dated to 1830-1840

Boy, that is awfully similar, isn't it? Except that on my piece, its not a loop, but a pigtail, or spiral. I've got three books on cast iron pans, and have scoured the internet for pictures of copper and carbon steel pots and pans and haven't seen one yet with a spiral piece for the bail. That's what strikes me as odd about mine.
 

Older The Better

Silver Member
Apr 24, 2017
3,142
5,848
south east kansas
Detector(s) used
Whites Eagle Spectrum
Primary Interest:
All Treasure Hunting
Yeah I saw that difference too, I can’t help with that but two similar items identified as trade items from the mid 1800’s is a good sign we’ve got correct interpretations. Mine has also produced gun parts and odd lead items
 

Last edited:

Top Member Reactions

Users who are viewing this thread

Top