AT Gold Question: My Discrimination 1 is messed up, how can i fix it?

[usinadi]

I was walking to a spot with my AT Gold and accidently pushed some buttons and now every time I turn my detector on the threshold is - 9 I think, the sensitivity is no bars, and when I put it in discrimination 1 there are several areas notched out that were not previously notched out. Is there a way to fix it or do I need to send it to Garrett to fix? It is out of warranty. Thank you for any possible advice!

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[xr7ator]

Did you try factory reset? Turn the machine on, then push the on button again and hold it until it beeps=factory reset.
Should do the trick....it it helps!

 

[usinadi]

I'm sorry for the late reply but I'll try that when I get home...thank you so much for the info! I'll let you know if it works!!!

 

[AllenJ]

If you bought your unit used and did not get an owners manual it is available online here: https://www.garrett.com/hobbysite/hbby-manuals/1533500_atgold_eng.pdf

Excellent information in it, I found it very useful.

Here is a pic of the button functions:



I hope it fixes the issue.

 

[usinadi]

ok thank you...I bought it 2 1/2 years ago...I know I have the manual put up some where but ill just use the pic you gave me for the reset.

 

[usinadi]

That Worked!!! Thank you all for your advice...I totally forgot to about the manual and do a factory reset. Thanks again!