help with metal detector...

[Coloradohunter04]

I just got my metal detector and it works great! Until I took it to my property... it makes half a second beeps and then stops, and there is nothing there, it does it randomly and not because there is something really small, It did it when I held it high in the air, it still detects but it kinda throws me off, when I hear it I always go over the area it did it and hear nothing, it is a Tesoro silver UMax.

 

Amazon Forum Fav 👍

Agony and Death on a Gold Rush Steamer: The Disastrous Sinking of the Side-Wheeler Yankee Blade - Grab it through Amazon!

[Treasure_Hunter]

How do you have your sensitivity set? It could also be EMI, are there any electrical lines over head or under ground near by...?

 

[bigfoot1]

put your cell phone in other pocket too.put in new batts

 

[Coloradohunter04]

I have my sensitivity at 10 and there is one phone box but it still did it when I moved away from it and the wire.

 

[Coloradohunter04]

put your cell phone in other pocket too.put in new batts

I didn't have my cell phone at that time, I will put in new battery, I put in the one that came with the box.

 

[Terry Soloman]

I have my sensitivity at 10 and there is one phone box but it still did it when I moved away from it and the wire.

Sensitivity is WAY too high at 10! Drop it down between 6-7 and see how you do.

 

[Treasure_Hunter]

How far did you move away 20 feet or 200 ft...? If you got EMI from electrical cable moving say 20 feet want mean much...

Like terry said your sensitivity is also too high..

 

[Coloradohunter04]

How far did you move away 20 feet or 200 ft...? If you got EMI from electrical cable moving say 20 feet want mean much...

Like terry said your sensitivity is also too high..

I found the problem! our neighbor had a phone box and I didn't see it, only our phone box, so I did't know what was going on! Thanks for the help though! I will turn sensitivity down, but most people who have this metal detector say to turn it up all the way, so I did! Opps!