IDigVirginia
Jr. Member
- May 5, 2016
- 34
- 55
- Detector(s) used
- Garrett AT Pro, Fisher F4, Bounty Hunter Discovery 2200
- Primary Interest:
- All Treasure Hunting
First let me say I am extremely happy with my AT PRO and the Garrett company. A side note here, I lost my headphone jack cap a short while ago and called Garrett to discuss the issue with the screen I am having and mentioned wanting to purchase a headphone jack cap and they sent one for free! Got it within a week.
Ok now for the problem. I have had my AT PRO for about 6 months and it has done great. However, within the last month or so I have noticed this line going through my screen (see picture). I understand that it is possibly an air bubble between the decal and the actual LCD screen itself. I mentioned this while on the phone with Garrett and they suggested rubbing my finger across it and it may go away...that doesn't work. I didn't want to push the issue because of the fact they were so nice to send me the cap. I am pretty handy with this type of thing, I have replaced very many iPhone LEDs and repair computers and whatnot.
I just want to know if anyone else has experienced this problem and what the solution is. I don't want to take off the decal and try to remove the air bubble and then not be able to reattach the decal or cause further problems. Thanks for your suggestions and Happy Thanksgiving!
Ok now for the problem. I have had my AT PRO for about 6 months and it has done great. However, within the last month or so I have noticed this line going through my screen (see picture). I understand that it is possibly an air bubble between the decal and the actual LCD screen itself. I mentioned this while on the phone with Garrett and they suggested rubbing my finger across it and it may go away...that doesn't work. I didn't want to push the issue because of the fact they were so nice to send me the cap. I am pretty handy with this type of thing, I have replaced very many iPhone LEDs and repair computers and whatnot.
I just want to know if anyone else has experienced this problem and what the solution is. I don't want to take off the decal and try to remove the air bubble and then not be able to reattach the decal or cause further problems. Thanks for your suggestions and Happy Thanksgiving!