After Electrolysis Cleaning.... How to preserve Metal?

Retired Fire

Hero Member
Dec 29, 2016
501
798
Charlotte, NC
Detector(s) used
Garrett AT Pro, Garrett Ace 400, 5"x8" coils for both. Whites PinPointer.
Primary Interest:
All Treasure Hunting

mojjax

Silver Member
Feb 27, 2005
4,563
4,090
MAINE
🏆 Honorable Mentions:
4
Detector(s) used
Ace 250
Primary Interest:
All Treasure Hunting

WannaDig3687

Gold Member
Jun 5, 2017
23,801
112,404
O-H-I-O
Detector(s) used
Garret ATMAX
Primary Interest:
Other
So I have cleaned some Relics with Electrolysis. Now I need to preserve the metal to prevent rusting. I don't want to use Hot Wax so what else can I do? Spry Clear Coat? Oils? What say you all? Thanks

I was told to apply a thin coat of machine oil or motor oil.
 

OP
OP
Retired Fire

Retired Fire

Hero Member
Dec 29, 2016
501
798
Charlotte, NC
Detector(s) used
Garrett AT Pro, Garrett Ace 400, 5"x8" coils for both. Whites PinPointer.
Primary Interest:
All Treasure Hunting
Thanks Mojjax and Wrightdigger. So a good coat of oil seems to be the way to go.
 

pa plateau hiker

Bronze Member
Jul 15, 2012
1,074
1,273
Primary Interest:
All Treasure Hunting
I use WD-40 and when dry, I coat with lacquer. I have done this for years, and it protects the metal from rusting.
 

smokeythecat

Gold Member
Nov 22, 2012
20,667
40,610
Maryland
🥇 Banner finds
10
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus II
Primary Interest:
All Treasure Hunting
If your relic was found in salty areas, the ocean, a bay or a field next to one, first soak it in fresh water, changing it out frequently to make sure there is no salt in the iron. One no salt is in it, and I assume yours is salt free to begin with, depending on where you dig in North Carolina, I let it dry for numerous days. Sometimes I put it next to a heat vent to get it going, then dry brush it and coat with clean polyurethane. I have relics I found in the 1970's that are still holding up fine after that much time.
 

Top Member Reactions

Users who are viewing this thread

Top