Build your own pinpoint probe Less than $15.00

[Anonymous]

Build your own Pinpoint Probe

http://members.fortunecity.com/nmhra/Detectors/Pinpointer.htm

I build one it looks like it is going to work just fine. But I turned the piece of P.V.C. end for end so I can hang it off the side of my bag
I only made my P.V.C. about 10? long just because that is what I had in my workshop

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[geophysicist]

Dan Clark stated on another website that he received reports about the project failing. He suspects that the manufacturer changed the detector.

http//dlclark.tripod.com/902.html

You may want do consult Dan before starting.

Matthias

 

[swizzle]

Any updates on this one? Swizzle

 

[prizm II]

I made mine from a "Little Wizard II". $15 to $20 at Harbor Freight or on line. The tip is made from a "SUPER SHARPIE" marker. I used epoxy glue to seal the end. When you take the Wizard apart the coil has about 4" of extra wire so you can insert the coil into the marker pen. I get about 1" on coins.

 

[Ricardo_NY1]

Strange but cool looking! I'm looking for something to mount to the ACE.

 

[gold fish]

I've been wondering if this would work. Looks like I have some tinkering to do..............Quickly egor, TO THE LAB !!!!!!!!

 

[stefen]

If you are a tinkering and it works...tinker me one also.

My electronic ability stops at a light switch.