riverdiver
Full Member
- Sep 27, 2011
- 212
- 364
- Detector(s) used
-
Whites Classic5 ID
White's Surf Master II with the dive rod
Garrett Treasure Ace 350
- Primary Interest:
- All Treasure Hunting
Using some PVC pipe and two plastic food jars, I made goodie containers for my diving detector. I cut out the lids using a hole saw and glue in a piece of 1/16" rubber gasket material with a cross pattern cut into the rubber to act as a check valve of sorts. The recovered items are pushed through the cross into the container but don't fall out if you get tossed about by current or wave surge. The bigger container on the right is for trash and is clear so that the curious can see the junk after the dive, while the container with the good stuff is opaque. The lid is off of the big one but it is a peanut butter jar.
