internal tube springs

[mckinney01]

Does any one out there have a good source for internal spring clips
for detector tubes.
I think I'm going to try and make a straight shaft for my excal

thanks
mckinney01

 

Amazon Forum Fav 👍

Diving for Pleasure and Treasure - Grab it through Amazon!

[pat-tekker-cat]

If you're talking about the little button thingys you push to extend or retract the shaft,
I had someone tell me last week or so, you can salvage them off of old crutches and walkers.
Said the stainless and/or surgical steel ones don't rust quite as bad in our salt water.
Hope that helped and good luck! HH!

 

[Metal Detecting Stuff]

We carry them.

Wayne

www.metaldetectingstuff.com

 

[shawninNY]

You just need to make the straight shaft , the lower rod connected to the coil has a spring clip in it!

 

[Thead]

I know this is an older post but I am placing info here in case anyone ever looks for them. McMaster-Carr carries them. They are called "Quick-Release Button Connectors for Telescoping Tubing".

McMaster-Carr