accu-trac -pimpoint- etc switch on GT

Sovereignelite

Bronze Member
Sep 30, 2012
1,297
455
Bloomington Indiana
Detector(s) used
E-TRAC & TESORO GOLDEN SABRE II---ETRAC COILS :SEF 10x12, SEF 6x8, X-5, Detech 8" concentric, ,--- TESORO COILS- 12x10 TOOLS: Lesche, Profind 25, Garrett Propointer
Primary Interest:
All Treasure Hunting
OP
OP
Sovereignelite

Sovereignelite

Bronze Member
Sep 30, 2012
1,297
455
Bloomington Indiana
Detector(s) used
E-TRAC & TESORO GOLDEN SABRE II---ETRAC COILS :SEF 10x12, SEF 6x8, X-5, Detech 8" concentric, ,--- TESORO COILS- 12x10 TOOLS: Lesche, Profind 25, Garrett Propointer
Primary Interest:
All Treasure Hunting
Thanks...I knew I could look at an online manual...but never thought about it. I Figured maybe a few would chime in with their personal experience. I see that the switch is disabled unless you are in all-metal mode, so it has lost much interest to me. I almost always use a little disc. I do plan on learning to use the all metal mode at some point (for searching instead of only pinpointing)Unfortunately the only practice I have had has been been with the Elite and that was only a couple hours finding my fiance's lost ring. The weather is not the best right now in Indiana:weather_rain: and cold.
HERE's a link for the manual.
 

Top Member Reactions

Users who are viewing this thread

Top