ctx3030

[janka]

Hi, I have access to a Minelab ctx3030 and was wondering how to set it up to only detect copper (ignore everything else).

Is there a way to achieve this? I would need specific beginner friendly instructions I could follow

Thank you!

 

Amazon Forum Fav 👍

Upgraded Night Vision Monocular Digital Infrared Monocular Telescope for 100% Darkness with 8X Zoom - Grab it through Amazon!

[gamiller]

I am not that familiar with the 3030 but I really doubt it.

 

[Metal Detecting Stuff]

If you have a similar piece of copper, you could air test it for a specific target ID range. But copper will ring at various IDs depending on the size of the object.

Wayne

www.metaldetectingstuff.com

 

[Jackalope]

Too many factors affect the resulting Fe-Co target display. If you just wanted one type of target you can DISC all but that particular response. But again, target depth, target orientation, sweep angle, soil type and moisture, and any differences in target shape or composition will throw off the response.

 

[Pointman]

That is difficult to do because copper coins falls in about the 12.41-12.45 or so range and so does copper pipes, aluminum and silver. Clad coins also read in this area.

In my parts, 12.42-12.43 will almost always be a copper coin.

 

[RustyGold]

Read the online manual at minelab.com to see how close you can dial it in!

 

[ChampFerguson/TN]

My experiences concur with Pointman's numbers.
I also think testing against various Cu objects as MDS suggests is the way to go. Do lots of air testing with as many different kinds/orientations/sizes/distances as you can stand and then set the machine up to accept just that range. Yes, you will still dig some non-Cu items, but it will be minimized.

May I ask why just copper?

 

[materdigger1]

Chat with "gonehunting" - If any one will know - he will - great guy and know the CTX inside and out like no one elso