Metal Prices

[hobo finds]

So. Az prices
Yellow Brass 1.80 lb
El Motors .22 lb
#2 ins wire 1.05 lb
Dirty Brass .60 lb
Die Cast Zinc .15 lb
#2 Copper 2.65 lb

 

Amazon Forum Fav 👍

Family Maps of Hinds County, Mississippi, Deluxe Edition - Grab it through Amazon!

[billjustbill]

Ft Worth, Tx:
Aluminum-UBC (cans) .64
Electric Motors .28
Al/Cu Radiators-old 1.45
Copper #1 2.95
Copper #2 2.80
Yellow Brass 1.97
Red Brass 2.28

At garage sales, after looking for my main interest, I'll go back through and try to find items I can sell for scrap: Old India brass cast items, jumper cables, copper cookware, and heavy and usually dirty copper extension cords. Today, I had 112 lbs. of yellow brass from old brass decorative items found at garage sales because brass items just won't sell at local garage sales....

On my last garage sale, I bagged up all those non-copper metal clamps left over from jumper cables. The 1 gallon baggie full sold for $5 (LOL)

Going into town last week, I stopped, turned around and went back to a garbage pick up in front of a house. There, leaning up against sacked garbage, was an old 12lb copper/aluminum oil cooler..... It brought $18.85!

All totaled, I came home with $343.85.

 

[hobo finds]

.85 alum cans
.30 #1 plastic btls

 

[hobo finds]

So. AZ prices

Alum Extruded .60 a pound

 

[hobo finds]

#2 Ins wire $1.05 lb
Yellow Brass $1.80 lb
Electric Motors .25 lb
#2 Copper $2.65 lb

So. AZ

 

[hobo finds]

So az prices

#2 ins wire up to 1.10 lb
#2 plastic milk .10 lb
#2 plastic color .02 lb
#1 plastic btl .30 lb
Glass bottles .03 lb
Cardboard .02 lb
Auto batteries .22 lb
Alum Cans .85 lb
Green circut boards .25 lb
Brown Circut boards .10 lb

 

[hobo finds]

So. Az prices
Cast Alum .50 lb
Diecast zinc .15 lb
Dirty Stainless .10 lb
Stainless steel .40 lb
Compressors .15 lb
Lead .40 lb

 

[mick56]

Aluminum			Iron
	Cans	$0.50​		Prepared	$260.00​	N.T.
	Clean (Sheet)	$0.50​		Unprepared	$245.00​	N.T.
	Unclean	$0.20​		Mixed Iron	$250.00​	N.T.
	Brkg	$0.10​		Unsorted Iron	$170.00​	N.T.
	Turnings	$0.30​		Heavy Torch	$200.00​	N.T.
	Siding	$0.55​		Steel Turnings	$60.00​	N.T.
	Cast	$0.50​		16" Steel Rims	$250.00​	N.T.
	Rims	$0.70​
	Clip	$0.60​		Tin
	Ext	$0.60​		Tin	$160.00​	N.T.
	EC (Alum Wire)	$0.45​		Vehicles	$175.00​	N.T.
	ACSR	$0.30​
	Alum Radiators Clean	$0.50​		Cast
	Alum/Cop Radiators	$1.35​		Clean Auto Cast	$260.00​	N.T.
		​		U.C. Motors	$200.00​	N.T.
	Copper			U.C. Diesels	$160.00​	N.T.
	Bare Bright	$2.70​		Pre Machine	$250.00​	N.T.
	#1 Copper	$2.60​		Unprepared Mach Cast	$220.00​	N.T.
	#2 Copper	$2.45​		Stove Cast	$160.00​	N.T.
	#1 Ins H.R.	$2.00​		Borings	$40.00​	N.T.
	#1 Ins L.R.	$1.60​			​
	#2 Ins	$1.10​		Charges
	Copper Radiators	$1.85​		Fridges	$20.00​	each
	Sheet	$2.45​		Dehumidifier	$20.00​	each
	Heater Cores	$1.30​		Air Conditioner	$20.00​	each
	Comm Wire	$0.25​		Microwave	$10.00​	each
		​		Burn Barrels	$5.00​	each
	Brass			w/lids	$7.00​	each
	Red	$2.20​		Computer CPU's	Free​
	Yellow	$1.90​		Computer Monitors	$10.00​	each
	Unclean	$0.40​		TV, VCR, etc	$0.30​	/#
	​				​
	Stainless			No Charge
	Prepared (304)	$0.40​		Hot water heaters	Stoves
	Breakage	$0.10​		Washers/Dryers	Dishwashers
	Turnings	$0.25​			​
	316	$0.60​		Misc
		​		Electric Motors	$0.25​
				Batteries	$0.27​
		​		Wheel Weights	$0.25​
		​		Lead	$0.55​
		​			​

Marshfield Scrap Company
2304 S Galvin Ave, Marshfield, WI, 54449
(715)389-1915

​

 

[hobo finds]

23 lbs Ewaste $28.78

 

[conceptmachine]

I own a machine shop, have been in business now for 13 years...I got barrel upon barrel of solid aluminum chunks. I always throw out my shavings...just mixes with too many plastics and such. Someday I'm gonna cash out... whenever I can get around to making many trips.

 

[skeeterd]

I own a machine shop, have been in business now for 13 years...I got barrel upon barrel of solid aluminum chunks. I always throw out my shavings...just mixes with too many plastics and such. Someday I'm gonna cash out... whenever I can get around to making many trips.

Some scrap companies will come pick up if you have enough to make it worth their time. Call a few and see what they say.

 

[pepperj]

I own a machine shop, have been in business now for 13 years...I got barrel upon barrel of solid aluminum chunks. I always throw out my shavings...just mixes with too many plastics and such. Someday I'm gonna cash out... whenever I can get around to making many trips.

If your milling the same material it'll fine, but if there's a mixture of grades it will better to separate the product or the yards will buy it at a mixed price.

 

[hobo finds]

$.80 a pound for alum cans
$.30 a pound for #1 plastic bottles

In So. AZ

 

[hobo finds]

So AZ prices

.25 lb dirty alum
.25 lb electric motors
1.05 #2 ins wire

 

[hobo finds]

MLC Alum .50 lb
Stainless Steeel .45 lb
Dirty Stainless Steel .13 lb

 

[hobo finds]

Painted alum .50 lb

 

[hobo finds]

Sheet iron .0925 lb / 185 ton

 

[hobo finds]

#2 ins wire $1.00 lb So. AZ

 

[Bassmaster96]

Computer CPU's Free

I bet they'll take them for free.

Arkansas
Copper #1 $2.60
Copper #2 $2.50
Aluminum cans $0.45

 

[hobo finds]

$.95 lb alum cans
$.40 lb #1 plastic bottles
$.04 lb glass bottles

in Southern AZ