Welcome guest, is this your first visit?
Member
Discoveries
 
Results 1 to 9 of 9
  1. #1
    RW
    RW is offline
    us
    Ron

    Feb 2007
    Fort Worth'ish
    Golden uMax w/CleanSweep - Back-up Etrac
    228

    A bunch of scrap (to me)...

    I have the chance to get a storage unit full of what I would mostly consider scrap. There are some new motors and fans that are worth some $$$, but I have no idea about the scrap value of the other stuff. I don't want to take it apart, just want to drop it off at a scrap yard. Would could I expect to get for things like:

    Washer/Dryers
    Central AC Units - The outdoor and indoor portions
    Convenience store glass door refrigerators
    Residential refrigerators
    Microwaves
    Electric and Gas ovens

    I think it was a HVAC repair shop storage and I don't want to test or fix the stuff.

    Any ballparks?

  2. #2
    fr
    Mar 2010
    195

    Re: A bunch of scrap (to me)...

    If you don't want to break the stuff down then you would get scrap steel price which is around .07-.10 a pound.

  3. #3
    RW
    RW is offline
    us
    Ron

    Feb 2007
    Fort Worth'ish
    Golden uMax w/CleanSweep - Back-up Etrac
    228

    Re: A bunch of scrap (to me)...

    Well that sounds pretty crappy.... I figured people were stealing AC units because they were worth something.

  4. #4
    fr
    Mar 2010
    195

    Re: A bunch of scrap (to me)...

    if you break them down you get more money. I am avg $2.43 a pound for copper, .19 for elect motors, 1.43 for brass and .93 for ins wire, 1.11 for cu/alum raidatiors and .08 for compressor. So it all adds up if you have the time to break it down

  5. #5
    us
    Apr 2008
    Russell KS.
    176

    Re: A bunch of scrap (to me)...

    If you have the time it would be well worth it to break it all down, everything you listed will have copper or brass in it, and it pays alot more than the steel price. Here copper is about 2.75 for #1 and around 2.50 for #2. Brass is about 1.55 a pound. Steel is hovering around 8 cents a pound here

  6. #6
    us
    Feb 2010
    Garrett GtaX1250
    625

    Re: A bunch of scrap (to me)...

    If you plan to do it legally & responsibly how did you plan to evacuate & dispose of the freon ? Just curious because it's something people rarely take into consideration.
    Live Free or Die

  7. #7
    RW
    RW is offline
    us
    Ron

    Feb 2007
    Fort Worth'ish
    Golden uMax w/CleanSweep - Back-up Etrac
    228

    Re: A bunch of scrap (to me)...

    Quote Originally Posted by NHBandit
    If you plan to do it legally & responsibly how did you plan to evacuate & dispose of the freon ? Just curious because it's something people rarely take into consideration.
    Well it didn't happen but if it did... I would release the freon back into it's natural habitat. I also like to burn ant hills with gasoline and old motor oil.

  8. #8
    us
    Jun 2006
    Out in the hills near wherendaheckarwe
    WHITES, MINELAB
    1,966
    3 times

    Re: A bunch of scrap (to me)...

    If you run into another lot like that, start calling some AC shops. Display coolers are worth a pretty penny! You could sell the whole lot, with them hauling them off for a good chunk of change. Look at other options to make more money with less work.
    I know it's here, just need a bigger coil!

  9. #9
    us
    Jan 2009
    Spring, TX
    54

    Re: A bunch of scrap (to me)...

    Quote Originally Posted by RW
    Well that sounds pretty crappy.... I figured people were stealing AC units because they were worth something.
    They don't really so much steal the a/c unit but rather strip the coils out of it while leaving the rest behind.

    Breaking down an a/c unit (regardless if it is a package unit or the condensor unit), it very easy. Seperating the coils, the electric motor, and wiring from the rest of the steel/metal should only take you 5-10 minutes each. It is pretty easy and I would not take it in without doing so because you lose much value that way.

    Other appliances like the fridges, washers and dryers are good just the way they are. You might snip the wires out from underneath if it is not too much trouble. Otherwise just take them in for shreddable steel value. In Houston we are getting 10.5 cents per pound which is very high and makes loads add up quickly.

 

 

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Powered by vBadvanced CMPS v4.1.3