-
May 11, 2011, 11:07 PM
#1
Problem with White's 5900 DI Pro SL
Let me say first of all that I am happy I stumbled onto TN while trying to find help with this problem. What a great site! I have owned this detector since the late 90s and have found a lot of coins over the years. I used to be able to set it on the "P's" and hunt away with no problem. I always got good sounds and prefect pinpointing. Now, it will do none of that. In fact, when you turn it on, all it does is chatter and hum loudly even if you are holding it up in the air. Electrical interference does not seem to be the problem as I have tried it at locations I have hunted many times before without incident and it does the same thing. I can swing it over a quarter and it does not even acknowledge it. I have cleaned the coil and cover, cleaned the battery terminals and checked the connections of both the battery box and cable connections, but no change. May consider sending it in to White's for repair unless someone here has some idea of a simple fix. By the way, even trying to ground balance makes no difference. It just seems as if it will not respond to any kind of adjustment. I welcome any and all suggestions. Thanks!
-
May 11, 2011 11:07 PM
# ADS
-
May 11, 2011, 11:18 PM
#2
Re: Problem with White's 5900 DI Pro SL
541-367-6121 Talked to the operator and Was transfered to Todd He was Great and was willing to listen to me and Took care of Me He may be able to Help you out!!! HH Chug
Dear metal detector God,
Thank you for all the stuff I find, I really appreciate the coins, toys, junk jewelry, old bullets, and all the other neat stuff I find, I try not to complain and cuss when I find pulltabs, foil, and other garbage, and I try REALLY hard to be nice to people who irritate me. I only have one complaint, I have yet to find gold and it's been a year now!
LinkBack URL
About LinkBacks
Reply With Quote
