Paid $15 for minelab explorer but has a power issue

Cooch

Newbie
Nov 25, 2017
2
3
Primary Interest:
All Treasure Hunting
So I bought a minelab explorer xs for 15. Looks like new but the guy left batteries in it for a long time and they leaked. Corroded some contacts which I cleaned. The power wires to the control circuit board were broke too which I resoldered. Put new batteries in and it turns on without pushing the power button. To turn off I need to pull out the batteries. If I hold power down for 5 seconds I get a warning about low batteries. Other than that it seems to work well.
Should I replace the face on it or just pull the batteries in and out?
 

devldog

Silver Member
Mar 9, 2012
3,642
6,335
Georgia
Detector(s) used
Whites MXT ALL PRO, Minelab Safari
Primary Interest:
Relic Hunting
Cooch, Congrat's to you on the Minelab Explorer. 15.00. What a deal.
 

Peyton Manning

Gold Member
Dec 19, 2012
14,534
18,684
🏆 Honorable Mentions:
1
Detector(s) used
MXT-PRO
Sandshark
Primary Interest:
Metal Detecting
for $15 it requires you to pull the batteries
 

Oct 5, 2014
31,886
35,424
Massachusetts
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Detector(s) used
Garrett: AT Pro, AT Gold & Infinium; Minelab: Explorer SE, II; Simplex; Tesoro: Tejon & Outlaw; White's: V3i
Primary Interest:
Relic Hunting
Hello Cooch,

It seems like the face plate may need to be replaced, since the on/off switch is inoperable. On FeeBay there is a listing for new face plates for around $65.00 dollars sent from the UK. These are not OEM, but rather a knock off, but still appears to solve the sticking contact problem.

Congrats on buying a Minelab for $15.00 dollars!

Regards,

Doc
 

Jason in Enid

Gold Member
Oct 10, 2009
9,593
9,229
Primary Interest:
All Treasure Hunting
helluva good deal! I could put up with a lot of oddities for a "functional" $15 explorer!
 

Top Member Reactions

Users who are viewing this thread

Top