Welcome guest, is this your first visit?
Member
Discoveries
 
Results 1 to 9 of 9
  1. #1

    Apr 2008
    Rio Seco
    Minelab Excalibur II
    69

    Possible Shipwreck Nail?

    I found this nail in Palm Beach County, in an area where there are known to be shipwrecks. Does this look at like it could have come from one? If so any idea as to what era the wreck/nail would be? It was quite a bit more corroded but I cleaned it in my homemade tumbler(which is a whole other story).
    Thanks in advance for any information.

    The scale in the image is inches.
    Attached Thumbnails Attached Thumbnails  Possible Shipwreck Nail? -nail.jpg  

  2. #2
    us
    Sep 2007
    wakeman, ohio
    J.W.FISHERS pulse 8x
    1,495
    4 times
    Shipwrecks

    Re: Possible Shipwreck Nail?

    looks a little small to be from a large shipwreck like a galleon, but it could be from a boat. most ships had at least 3"-8" hull planking plus the nail or spike had to go through the rib and be bent over to clench it off. it could be from the deckhouse though. most older shipwrecks had square spikes/nails that one looks round. I'd say maybe an old shrimpboat or fishing boat.
    them that dive will be the lucky ones !!

  3. #3

    Dec 2006
    JW Fisher 8x
    96

    Re: Possible Shipwreck Nail?

    At what point did nails of this type start to have circle heads. All the smaller copper nails Ive found been square.

  4. #4

    Jul 2007
    649

    Re: Possible Shipwreck Nail?

    I believe wire nails date post 1890.

  5. #5

    Apr 2008
    Rio Seco
    Minelab Excalibur II
    69

    Re: Possible Shipwreck Nail?

    I have no doubt that you are correct in saying that it is not super old. As an aside I'm sure that even the largest ship had small nail all over them. Any wooden crates and things like that would require small nails not large spikes, but I agree that the age is probably not to much before the turn of the century.

    Thanks

  6. #6
    us
    Sep 2006
    Pensacola, Fl
    Minelab Explorer XS
    914
    1 times

    Re: Possible Shipwreck Nail?

    I've seen copper sheathing laying around an 18th century wreck site that still had the round-flathead copper nails (tacks) sticking through. However, the shank portion of these nails were squared down to the point. The longest ones were just short of 2 inches.

    Pcola

  7. #7

    Dec 2006
    JW Fisher 8x
    96

    Re: Possible Shipwreck Nail?

    Yeah same here, thats the word I was thinking of "Tacks" thanks.
    Yeah Ive pulled up pieces of copper sheathing with the tacks still through it wobbling around in the hole from early 1800 ships but Im pretty sure they were square as well.. Id have to go and look at them again.

    theGOLD

  8. #8
    us
    ScubaGecko

    Jun 2004
    Beaufort, SC
    Garrett Sea Hunter Mk II
    1,888

    Re: Possible Shipwreck Nail?

    I have a picture I will post of some similar nails in a piece of wood from a wreck from the 1700's. It has treenails, a large broken bronze square spike and small round bronze nails all in the same piece of wood.

    I believe its from an English Man-O-War from around 1770.

    RGecy

  9. #9

    Dec 2006
    JW Fisher 8x
    96

    Re: Possible Shipwreck Nail?

    RGecy, do you know what part of the ship your piece of wood was from? I ask because I wonder what other parts smaller tack nails may have been used for aside from things like copper sheathing. (The sheathing I referred to was also from an English Man of War)

 

 

Sponsors

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Search tags for this page

i found a piece of ship wreck with copper nail

Click on a term to search for related topics.
Powered by vBadvanced CMPS v4.1.3