Swivel heads on displays?

[Nicksan]

When using my MXT I find myself twisting the whole machine so I can see the display. Obviously holding the machine to one side means the display does not line up with your vision. Why have the manufacturers not realized this? I would love to see the Displays have the capability of swiveling left of right. What do ya think?

 

Amazon Forum Fav 👍

DR.ÖTEK Metal Detector, Waterproof Gold Detector, Pinpoint & Terrain Modes, Professional Metal Detector - Grab it through Amazon!

[slow sweeper]

I also use an MXT. I do not constantly look at the VDI. I pay attention to overlapping my sweeps. My eyes are focused on the coil. The audio is my first clue as to whether I want to investigate further. After immediately pinpointing the target, which you must do with the MXT to get the most accurate information, three or four short sweeps tells me if I want to recover the target or not. And the VDI display is right in front of me while I check out the target. I see no reason for a swiveling display pod.

 

[dan_h]

The Garrett CX Plus would be a lot more pleasant to use if the meter could be tilted toward the user. Swiveling from side to side would not be helpful.