|
-
Jun 04, 2010, 01:25 PM
#1
-
Jun 05, 2010, 10:20 PM
#2
Re: What kind of detector do you use and deepest target you recovered with it??
I use a whites XLT & surfmaster PI. I have recovered a target at 2 feet on the beach, but I must confess it was a boat anchor. I have also recovered a license plate at 2 feet. Those were my deepest recoveries.
-
Jun 30, 2010, 01:12 AM
#3
 WolfPack Life Member
Re: What kind of detector do you use and deepest target you recovered with it??
I have used quite a few detectors and have found some really deep beach finds................
The deepest coin I ever recovered on land was in the woods under an evergreen; A silver quarter down right at a (very honest) 20 inches.
Now it was in mostly decomposed nettles, and BARELY registered (ziiiip, ziiip) with my Fisher 1266, which I had cranked to the max, sensitivity pushed in
and full clockwise.
I almost passed it up, but if any of y'all have ever used a '65/66, then you know the zip I am referring to and it nearly always means coin.
By the way, it was a fairly worn 1945 quarter, and I dug a lot of Indian head pennies there from the 1870's and up at less the 4 inches!
Regards, SkyPilot
"Surrender, surrender but don't give youself away" Cheap Trick
-
Jun 30, 2010, 11:44 AM
#4
Re: What kind of detector do you use and deepest target you recovered with it??
I use a Whites M6 and the deepest target was 11 inches down with the stock 9.5 coil. The item was the handle of a old pail.
A bad day of "dirt fishing" is better than a good day at work.
-
Jul 02, 2010, 07:00 AM
#5
Re: What kind of detector do you use and deepest target you recovered with it??
The deepest target I've recovered was with a Sea Hunter MKII. I don't take measurements so I can't say exactly how deep. Asking questions about depth is like asking a fisherman about the one that got away.
-
Jul 02, 2010, 07:59 AM
#6
 WolfPack Life Member
Re: What kind of detector do you use and deepest target you recovered with it??
 Originally Posted by GibH
The deepest target I've recovered was with a Sea Hunter MKII. I don't take measurements so I can't say exactly how deep. Asking questions about depth is like asking a fisherman about the one that got away. 
I know that's right, GibH! 
I was basing my measurement from the pole detent holes to the end of the shaft.
I don't carry a tape measure with me or anything like that!! LOL!!!
By the way, I LOVE the comparison to fishermen!!!! 
Now that's apples to apples!!
Regards, SkyPilot
"Surrender, surrender but don't give youself away" Cheap Trick
-
Jul 04, 2010, 04:12 PM
#7
Re: What kind of detector do you use and deepest target you recovered with it??
20L pot, 2m+ with DBP2010, 450mm WWI granade 3m, DBP2010, about 200mm shell 1.5m with Miner4 many good signals abandoned after 1.5 or 2m digging both Miner4 and DBP.
regards,
d.
better detector, more digging
-
Jul 06, 2010, 03:20 PM
#8
Re: What kind of detector do you use and deepest target you recovered with it??
Dear group;
A rusty burro shoe at over 30" (the length of my shovel) using a Minelab SD 2100 with a Coiltek 18' pizza pan mono coil. I also use a Minelab GP-3000 and a White's GMT.
Your friend;
LAMAR
-
Jul 22, 2010, 07:18 PM
#9
 Half Dead and Dynamite
Re: What kind of detector do you use and deepest target you recovered with it??
I recovered a 1903 V nickel at around 8" with my Ace 250 on my second or third hunt ever.
No pinpointer.
Maybe it's time to stop not doing what you pretended you can do and can't, and start doing the thing that you can't do, but can no longer pretend that you can.
-
Jul 26, 2010, 11:32 PM
#10
Re: What kind of detector do you use and deepest target you recovered with it??
Sovereign xs-2a pro with 15" wot : Flattened can at around 2 1/2 feet
-
Jul 28, 2010, 06:30 PM
#11
Re: What kind of detector do you use and deepest target you recovered with it??
I have an old house foundation on my land here in N.Y. in between there and the old outhouse just two days ago i dug a 1837 quarter at 15 inches been very rainy here this summer .
I just got my Ficher CZ-6a back from fisher repair lab new coil and Retuned it man its hot !!
thanks G.A.P.metal
I`v been detecting for 40 years owned my own detector shop G.A.P. Metal Detectors ..and loved every minute of it,hunt with a guy thats been doin it for 43 yrs 607 398 8669
Its the Golden Rule who ever has the Gold Rules
-
Jul 28, 2010, 07:34 PM
#12
Re: What kind of detector do you use and deepest target you recovered with it??
Surveyor's detector; hot rock at 3 feet, and paint can at 2.5' Grrrrr...
Hence the moniker!
"A casual stroll through the lunatic asylum shows that faith does not prove anything." — Friedrich Nietzsche
-
Aug 07, 2010, 08:17 PM
#13
Re: What kind of detector do you use and deepest target you recovered with it??
Had a fisher F5 that was repaired by fisher and it found a 1950's shirt snap button and sometimes cuff snap 1/4 ' in size.
It was 14" deep. The fisher had an extremely high beep and I never heard another detector with that high of a beep.
It said it was a dime.
-
Aug 16, 2010, 02:47 PM
#14
Re: What kind of detector do you use and deepest target you recovered with it??
I am now using cz5 that I am still learning,but in past using fisher 1236x2 with hothead coil found a brass matchsafe at 18",dimes and pennnies at up to 11"(8" coil)
using Whites Eagle 2 an IHP at 11",aluminum can at 2'(950 coil),using whites prizm 4 a wheaty at 9",using Whites spectrum cans at up t0 18",and a 6lb cannonball at 34",
but my deepest target was using a compass 77b yukon(C1974) a studebaker engine at maybe 5 ft.My Dad and Uncle had a big laugh at that Because they had buried it. as trash.
HH,Mont
-
Aug 16, 2010, 03:57 PM
#15
 monty
Re: What kind of detector do you use and deepest target you recovered with it??
I have used a Chinese detector, a GTI 2500, an ACE 250, a SilverUmax, a Radio Shack 3000, and a Safari. The deepest thing I have recovered of value was a couple of clad dimes at about 9". The reason I know it was 9" was because I planted them in my coin garden. I have heard a few deeper targets with the Safari but I don't have the urge to dig that deep! Oh, both dimes were with the ACE 250. Most of my finds have been 6" or less. Monty
Don't make me loose the hounds! If you dig, Cover up your holes.
-
Aug 16, 2010, 05:25 PM
#16
Re: What kind of detector do you use and deepest target you recovered with it??
In the past: Explorer XS 25c @ 7"; Whites MXT 25c @ 7"; Whites CM4 disc shield nickel 7".
Current detectors: Minelab XT70 5c @ 5"; Fisher F70 copper mem c 5.25". HH, George (MN)
-
Aug 16, 2010, 09:41 PM
#17
Re: What kind of detector do you use and deepest target you recovered with it??
Yes I agree most coin targets at abt 6",in the extreme cases the ground was wet and and neutral ground,
-
Aug 24, 2010, 01:02 PM
#18
Re: What kind of detector do you use and deepest target you recovered with it??
Fishing lure at the beach, 12 inches. Used the Sovereign GT.
He who fears digging trash will dig no treasure.
-
Sep 05, 2010, 10:13 AM
#19
Re: What kind of detector do you use and deepest target you recovered with it??
Silver quarter at 11" with a Cibola and a railroad spike at about 18" with a Vaquero. This particular Cibola will air test to 13.5 on a quarter. Have never hit a coin that deep except for a 12" coin in my test garden. This does not count. Too much like catching stocked trout in a mill pond.
OT
-
Sep 05, 2010, 10:30 AM
#20
Re: What kind of detector do you use and deepest target you recovered with it??
I dug a Mercury 1935 au 18" in sandy loam. In a town that was call Texon, With a Predator II
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Search tags for this page
deepest coin detectors, kind of detector, whitescm4
Click on a term to search for related topics.
|