Battery Charger Replacement ?

[jeff of pa]

My Sovereign's Battery Charger went Bad.

If I Replace This



With

This



Will it work ?

[Carl-NC]

Jeff, you really cracked me up with this one.



"My Sovereign's Battery Charger went Bad."

Yup, I'll say it did!

To answer your question, the 12V charger will probably work, but might undercharge the pack. NiCads are somewhat forgiving.

[Daedalus]

It will work, but slower and you will raise the amp draw by the lower voltage output. Not real bad on the scale of things . Also if you check the output of the 12 volt it may already be in the 13 or 14 volt range as the standards are not to tight on dc voltage. Like in your auto , 12 volt system but when you look at the output it says 14 volt .

One thing you really need to check is the pin out and make sure the center of the plug is + or - is as it is needed for your battery pack .
You can get a cheap one at Wally world that will put out multi voltages and have the plugs that you need for you machine . I would check that also .

[jeff of pa]

Rewired For now



Hopefully I Got the Wires Correct.


It threw a Spark when I Pluged
the Plug into the Battery

Should Know by this Evening
If Battery is Warming Up

[stevemc]

Always have the charger unplugged when you plug it into battery. Then plug it in. Might make something not work, like either the charger or the battery.