Hi, I broke the stem off of the disc knob on my CZ5. Can anyone advise me on how to remove the control box lid to replace the pot. Any advise is greatly appreciated. Thanks, Don
Not familiar with the CZ, but it looks similar to my 1266.
The box is 1 piece, it does not come apart.
Remove the 2 screws next to the coil connector and you might have to remove the nut from the charger connector.
Everything should come out from the front.
Thanks very much for the info Deep 1. Now I have to get up enough courage to do it! I'd like to Deoxit the other pots when I get in there and clean the circuit board also. Not sure what to use to clean the board. Thanks again, Don
Got a good friend who worked on one of my Fishers, Rebel Metal Detectors in SC. Steve was a Fisher Service Center. Good Guy to know, fair priced, and a good old southern boy.