Garrett Digging Tool FIX

mattidlewine

Newbie
Mar 19, 2013
1
3
Primary Interest:
All Treasure Hunting
Cut old rubber back and glue on a 3/4 pvc cap.. My hand thank me. photo.JPG
 

justdon

Bronze Member
Aug 6, 2013
1,819
347
Florida
Detector(s) used
Teknetics delta4000/Tesoro compadre/Garrett ace 250/Garrett propointer/Garrett at pro/Tesoro silver umax
Primary Interest:
Metal Detecting
Not bad.Pretty good idea.
 

the bone

Full Member
Jul 8, 2012
153
127
michigan
Detector(s) used
bounty hunter tracker IV
Primary Interest:
All Treasure Hunting
also you can get "bar ends" for a bicycle for pretty darn cheap on ebay and the work great.
 

dbach149

Jr. Member
Aug 4, 2013
22
14
PA
Detector(s) used
Garrett AT Pro
I picked up a pair of BMX handle bar ends.
 

Attachments

  • image-3782453931.jpg
    image-3782453931.jpg
    77.2 KB · Views: 156
  • image-764458442.jpg
    image-764458442.jpg
    74.1 KB · Views: 191

sask hunter

Sr. Member
Aug 26, 2013
413
111
yorkton saskatchewan
Detector(s) used
bounty hunter tro/bfo
ace 250
teknetics 4000
atp pro
minelab ctx 3030
Primary Interest:
Metal Detecting
I pulled off my rubber and welded a washer on the end then put abit of silicone one the end and slid the rubber handle back down and after hours of use has not cut the end like my first one did

Sent from my iPhone using TreasureNet
 

Top Member Reactions

Users who are viewing this thread

Top