metal detecting

[tallpaul]

just wondering how many of you crank up fully on the sensitivity,,

[gunner6170]

i rarely have it cranked all the way up. i normally play with and adjust it
depending on the site and amount of trash and nearby interfering objects
if at a play ground or whatever.

[hollowpointred]

thats a hard question to answer since soil conditions kind of dictate how high i can set it. ideally,i will crank it all the way up if i can,but if the machine starts to chatter and give false signals i will back it down untill it just becomes stable.

[Colorado Bob]

Sensitivity full
Volume full
Threshold at minimum, can't miss those faint ones.

[Born2Dtect]

I use my machines AUTO Sensitivity unless I get false readings or a lot of chatter then I turnn it down until I get good readings.

Ed

[jeff of pa]

I do as Ed Does

[stoney56]

Sensitivity full
Volume full
Threshold at minimum, can't miss those faint ones.

Yep but have a high tolerance but no threshold. Actually sens. set just below chatter.

[JakePhelps]

I put mine almost all the way up, or if batteries are low all the way up.

[JerV3]

Every trip mine is maxed out. Also have the rest of the dfx maxed out accept for the block edit disc edit. I take -40 through plus 95. Anything else your running way to hot and will be digging iron 15 inches deep.

HH Jer

[tallpaul]

jef and ed,, so do i its the best way,, i only crank up when i have too,