Solved 14 Boomer? and other things.

[cdsieg]

Most curious as to what F and G are, even though I would be happy with a response on any of these items. Thanks for your help!

[creskol]

I know that Boomer made different sized cast iron Parlor stoves, so I would bet that one piece is a shaker grate from a No. 14 Boomer Parlor stove.

The bracket with the three bolts is a tongue bracket off of a plow or some other horse-drawn piece of equipment.

G is some type of buckle .. can't remember the name right off, but I will try to find one in a little while.

[ouachitacaveman]

I believe that
" C " is a thermostat housing off of
a very old car or a tractor.

[Kieth-Tx]

ouachitacaveman I beliece it right on that part.
Item "G" looks like the grill off the stove.

[dozer dan]

i'm thinking "D" is a right angle gear drive housing. most likely from an old tiller or steering box from tractor or car.

[cdsieg]

I know that Boomer made different sized cast iron Parlor stoves, so I would bet that one piece is a shaker grate from a No. 14 Boomer Parlor stove.

The bracket with the three bolts is a tongue bracket off of a plow or some other horse-drawn piece of equipment.

G is some type of buckle .. can't remember the name right off, but I will try to find one in a little while.

Thanks creskol, I appreciate your help, please do shot the buckle name my way if you remember it. Thanks again, Cindy

[cdsieg]

i'm thinking "D" is a right angle gear drive housing. most likely from an old tiller or steering box from tractor or car.

LOL on my guess if that is the case! I am not to cool at the guessing game! Thanks for your thoughts! Cindy

[cdsieg]

I believe that
" C " is a thermostat housing off of
a very old car or a tractor.

Thank You, in another one of my forum questions I found and old Model T part, so I searched to see if this was the thermostat housing off of that, but must be another brand!

[kracer55]

C is half of a steering box and I think G is part of a grille for an air intake to an old wood stove

[dozer dan]

i'm thinking "D" is a right angle gear drive housing. most likely from an old tiller or steering box from tractor or car.

LOL on my guess if that is the case! I am not to cool at the guessing game! Thanks for your thoughts! Cindy

oops. sorry about that. i read the letter to the right of the object when it should have been to the left. is that a grease fitting i see in the back side of it?.


i meant "C"



and thats my final answer.

[Daedalus]

C looks like the starter housing off a tractor , you can see the off center throw out shaft housing . Can't be sure with out a lot of data. But that is my guess.

[cdsieg]

i'm thinking "D" is a right angle gear drive housing. most likely from an old tiller or steering box from tractor or car.

LOL on my guess if that is the case! I am not to cool at the guessing game! Thanks for your thoughts! Cindy

oops. sorry about that. i read the letter to the right of the object when it should have been to the left. is that a grease fitting i see in the back side of it?.


i meant "C"



and thats my final answer.

Makes me feel a little better about my guess of D being from a lamp! LOL

[cdsieg]

Thank You everyone for your thoughts, I will consider this one solved! thanks again!!! Cindy