Just traded my Garrett GTI 2500 for White's DFX!!

[crevias]

Just traded for a dfx. I am new to White's Machines. Any good tips for a newbie on some depth?


Keep Diggin!!
Crevias

[Eu_citzen]

Don't worry about depth quite yet, start out with factory programs just increase sens.

Preamp Gain at 3
AC around 65-75 is usually good. (what ever is stable)

When much iron is around use Correlate, also helps when in much interference.

[treasurehound]

Hello from Lenoir City, Tn. I just got a DFX 300 myself and have been having a ball with it. You have a White's dealer right there and he is very helpful. I go to him a lot and he is a member of the metal detecting club too. Maybe we can get together sometime and take the machines out and give them a good workout. I have been hunting a lot in Blount, Knox and Loudon counties.

[Eu_citzen]

While I think of it here are some tips:
Start out using C&J mode (coin and jewellery)
VCO on
Tone ID on
DC Phase on (gives you a 15kHz none normalized VDI reading when pinpointing)

Focus on the Signagraph it shows much more info of the target then the VDI number but also can show other close by targets.
Use VDI to back up the decision to dig.

Maybe I'll write up more later,
Eu

[crevias]

While I think of it here are some tips:
Start out using C&J mode (coin and jewellery)
VCO on
Tone ID on
DC Phase on (gives you a 15kHz none normalized VDI reading when pinpointing)

Focus on the Signagraph it shows much more info of the target then the VDI number but also can show other close by targets.
Use VDI to back up the decision to dig.

Maybe I'll write up more later,
Eu

I WILL GIVE IT A TRY.

[Mr.Jody]

Any reason why you traded?I am thinking about buying one of those(gti2500) how did you like it and did it go deep?

[vanoldschool]

I have had mine for two months now, I usually just use the coin and Jewly setting until i learn the rest, but when you pin point hold the trigger and go slow and you will hit your target perfect!!

[Keppy]

Any reason why you traded?I am thinking about buying one of those(gti2500) how did you like it and did it go deep?

I had the XLT and the DFX but liked the MXT best of all now on the Garrett GTI 2500 i would say it is deeper than all the Whites i had a GTI 2500 my brother has it now i have the GTI 1500 the GTI 2500 has that .. All Metal Deepseeking Mode... that makes it go deeper than a DFX..XLT or the one i like the MXT............

[Eu_citzen]

Any reason why you traded?I am thinking about buying one of those(gti2500) how did you like it and did it go deep?

I had the XLT and the DFX but liked the MXT best of all now on the Garrett GTI 2500 i would say it is deeper than all the Whites i had a GTI 2500 my brother has it now i have the GTI 1500 the GTI 2500 has that .. All Metal Deepseeking Mode... that makes it go deeper than a DFX..XLT or the one i like the MXT............

Depends on the object, settings, ground conditions and so on.
In my area it is the other way around. All metal mode gives about another 3-4 inches, in air with the GTI.

The DFX also offers mixed mode which makes it very close depth wise, maybe 1 or 2 inches less at best.
In my trails with both they where very close depth wise. So it really comes down to personal preference .

[baspinall]

Crevias - Get this book. it's free from Whites.

http://whiteselectronics.com/index.p...l&view=dfxbook


Also get Diggin Deeper with the DFX - Not free but very good book to have.

http://www.digdeepdfx.com/


Another good link is - http://www.dfxonly.com/forum/

Hope this helps - Brian