A good silver program for my DFX with a SEF 10x12 coil ?

[Deepdiger60]

Ive tryed a few programs for deep silver with my new SEF 10x12 coil but they seem unstable to much numbers jumping all over the place the depth is great up to 8-10 inches is no problem i tryed 3 K and 15 K or both it seems very unstable ,, is there a program with that SEF coil that anyone has tried yet on a DFX ?? Thanks Jim

[Sandman]

These programs can work wonders in some areas and not so hot in others so it is hard to just say, use these settings. If you are having trouble with VDI jumping around, clean out coil cover, fresh batteries and turn down the gain and AC sensitivity a might to see how that works. The larger coil might be the problem as it "sees" more ground.

[Deepdiger60]

Thanks Sandman ill give it a try and let you know ,when you say coil cover do you mean the bottom of the coil ? or do i have a removable coil cover ? on that SEF i dont think my cover comes off i only been doing this 6 months lol when i used my stock 9.5 coil i had no problems i found a lot of stuff but since i have put the new coil on SEF 10x12 and made some custom programs thats when the VID numbers jumped all over the place . Where i live its a strip of land maybe 20 miles by 13 miles long iam surrounded by salt water on 3 sides its a very old town it goes back to the early 1600,s most of the soil is farm land very rich dark soil almost like luminous very easy to dig if i don't hit a layer of Oyster shells always below 6 to 7 inches which seem to be everywhere out here for some odd reason . Thanks Jim