SICK V 3 upgraded to V3I Question

[Whydah]

Here is my problem... I can use my V3i in Jewelry Beach mode and pin point with no problem, when I pull the trigger it pin points back and forth and side to side perfectly.
When I use any other program, Coin, Coin Jewelry, Deep Silver exc.... It finds the object, but when I pull the trigger to pinpoint, it makes a steady hum and I am only able to pin point side to side Not up and down? I just got it back from Whites, for this same problem, and they up graded the software to the V3i series for free........ It was sent in for the same reason before, and they put a new loop on it for me and said it was all set...... Now my waranty has run out.... what to do now??

[bigtim1973]

I would contact Whites by phone and see if you can talk to the tech that worked on it for you and see what they say. It may be as simple as resetting everything to some kind of factory settings. Other than that is everything else still working ok? It may have something to do with the threshold setting. Good luck, Tim

[Whydah]

Thanks Tim,
All set now... VCO was in the OFF position silly me....

[bigtim1973]

Good deal!!!! How do you like using the V3?

[Whydah]

A little tricky at first and realHOT out of the box but if you tone it down just a little it is a GREAT water machine..... I do a lot of beaches...... Land is great too in the DEEP SILVER mode.... Good Luck Whydah