any prism 6t users out here?

[vaquero44]

i don't know why but i'm intrigued by this machine i know the one thing i like about it it runs at 8.3 khz i think, any feed back would be great!

[George (MN)]

Major quality control problems with 9" coils, you may get lucky, maybe not. If buying, get one less than 2 years old so you have warranty, which can be transferred from original owner. Best regards, George (MN)

[rws51]

Hey Vaquero, stay away from the 6T. I used one earlier this summer and it was pathetic. A friends dad had bought this detector new and basically never learned how to set it up and use it.
I met up with him and set the detector up correctly and showed him how to use it. The display was constantly jumping and the 6T never found a single coin that day where the Vaquero and CZ5
was pulling coins from where the 6T had just hunted. The 6T is a real pooch for the cost of the detector. No way would I even think about buying one.......it is about like a Coinmaster Pro. Nuff said.

Roger

[Cal G.]

yep, I use one. I use mine mainly with the 4x6 DD coil on tot lots, sidewalks. I do use the 9inch spider coil on volley ball and soccer fields. I IDs in all metal as well as Notch and has 9 tones if you choose to use.Very easy to ground balance and is 4x6 is the hottest coil for it's size that I have used. No problem with mine and lite weigh. Just my 2 cents. CG

[vaquero44]

I know its been a while but when i started this thread but i was currious about this machine but no more its just not what its cracked up to be