I need someone for advice on setting my dfx.Today I finally found the best place in s.e.Texas to detect at.Back in the 1800's there was a hot spring where people would come from all over to bathe in the mineral water.There was a huge hotel there and all of the wealthy people would gather.It burned down around 1904.I found an old man that lives near to show me the site.I was there 25 years ago,but could not find it.It has really overgrown.I detected for 5 minutes but got a lot of nail signals.There used to be bath houses around the spring.How should I set my detector to bypass the nail signals?I would really appreciate any help.I am going back in the morning.The old man said he brought his 1970 radio shack detector there 20 years ago,and he found an 1886 silver dollar.
I need someone for advice on setting my dfx.Today I finally found the best place in s.e.Texas to detect at.Back in the 1800's there was a hot spring where people would come from all over to bathe in the mineral water.There was a huge hotel there and all of the wealthy people would gather.It burned down around 1904.I found an old man that lives near to show me the site.I was there 25 years ago,but could not find it.It has really overgrown.I detected for 5 minutes but got a lot of nail signals.There used to be bath houses around the spring.How should I set my detector to bypass the nail signals?I would really appreciate any help.I am going back in the morning.The old man said he brought his 1970 radio shack detector there 20 years ago,and he found an 1886 silver dollar.
I would run the stock coin and jewelry program. Listen for solid repeatable tones. The DFX actually works really well, but the tones it makes and the manner in which it makes them makes you feel that you are missing things. When you hear a solid repeatable signal then you can look at the display. You will be able to go back to that site many times, correct? Go back after a recent rain to get more depth.
garretts gti2500, gtp1350 minelab 30 whites coinmaster 3 and a new DFX300.
164
1 times
Metal Detecting
Re: Need help with my whites dfx
I use the coin mode and reset the a/c sensitivity and the pre amp gain ussually 76 and 3 respectively up the d/c sens. to 45 for the nails maybe try a bottle cap reject of 10 that should ignore the nails. That works good for the ground here in virginia. Don
Director-Search & Recovery Team of Oakland County.
Aug 2005
In Michigan now.
Excal 1000, Sovereign GT, CZ-20, Tiger Shark, Tejon, GTI 1500, Surfmaster Pulse, CZ6a, DFX, AT PRO, many more.
9,431
57 times
All Types Of Treasure Hunting
Re: Need help with my whites dfx
Stick to the preset Coin and Jewelry mode. Then by raising the pre amp and gain you dial in more iron nail. Back then they didn't use alum nails but these would report if you ran over one. Don't disc out screw caps either as this will lose silver quarters and above. Get this book by CJC.
I would use a small coil like the 5.3 or 4x6DD, It really helps in heavy trash. Also increase recovery speed, helps separate targets that are close together. Works for me where I hunt. Good luck, Niffler