Goldmax Sierra coil question

[Kaimi]

Seems that there are a LOT of MXT users out there BUT I use the GMT with great luck finding gold and meteorites. My question is this:

With the Goldmax Sierra coil I may be able to cover more ground BUT it is sooooo sensitive it drives my nuts. Do I need to turn the gain and or vSat down for better control of what I am finding?

I currently am running about 5 for the Gain and 7 for the vSat. I run with the irn ID switch ON all the time and the signal boost ON all the time. My threshold is just and I mean just above a hum as I dont like to wear headphones. For some weird reason whenever I wear them I run into snakes. Go figure, they must know when I am wearing them! DUH!!

I primarily am hunting, with great success, meteorites in the Franconia,AZ area.

Mahalo and Aloha for your help,
Kaimi

[Nitro 54]

I to use the Goldmax , try turning your boost off and turn the gain up around 8 if your ground will handle that much. The boost as I know it is for helping to pin point the weak signals. The Goldmax isn't supposed to be as sensitive as the stock or smaller coils for small gold, but if it's not, I can't tell it. That coils sure gets heavy after a hour or so. HH