High Tension Wires and the DFX

[N.J.THer]

Over the weekend I hit a site next to railroad tracks that have power lines over them for the trains. I've read about others getting interference with high tension wires but I did not think the train wires would give off enough energy to affect the DFX since I was a little distance away but I was wrong. I was receiving lots of interference and false signals. Is there any way to adjust the DFX settings to low the interference? Even if it gives up a little sensitivity or depth I would really like to hunt this site. Old stage coach stop.

Thanks in advance for your input.

NJ

[ReidMan]

Turn down the gain, turn down the sensitivity.

[Sandman]

Turn down the gain, turn down the sensitivity.

This is about the only thing you can do except install a lot smaller coil. Sometines cell phones can do the same thing.

[N.J.THer]

Turn down the gain, turn down the sensitivity.

This is about the only thing you can do except install a lot smaller coil. Sometines cell phones can do the same thing.

Thanks...already had a 5 inch coil on it.

[N.J.THer]

Turn down the gain, turn down the sensitivity.

I'll give it a try...Thanks.

[Eu_citzen]

What ReidMan said. I'd also try Correlate might help to.

[united]

This one beach that I hunt at has a buried high voltage line. When I was mding the area for the first time with the DFX it went crazy- I thought it was broken . I did a hard boot but nothing worked, I just kept away from the area or run past it. Last month, I was walking the water line with mixed mode on, and walked right by the area and found a quarter! barely any interference, maybe you can try that.. HH Don

[N.J.THer]

Thanks everyone

[extractor]

good tips, thanks