2000 P South Carolina quarter

J.sanchez1980

Tenderfoot
Jul 22, 2022
5
16
The weight is 5.63 grams it doesn't have the reeded edge either 20220722_153956.jpg 20220722_153943.jpg
 
Upvote 6
OP
J

J.sanchez1980

Tenderfoot
Jul 22, 2022
5
16
  • Thread Starter
  • Thread starter
  • #3
Thank you I'm not sure what I have found I know it's not like the other 2000 p south Carolina quarters I've seen just curious if it's a good error quarter
 

cudamark

Gold Member
Mar 16, 2011
12,390
12,396
San Diego
🏆 Honorable Mentions:
3
Detector(s) used
XP Deus 2, Equinox 800, Fisher Impulse AQ, E-Trac, 3 Excal 1000's, White's TM808, VibraProbe, 15" NEL Attack, 5X10 Joey, Steath 920ix and 720i, TRX, etc....
Primary Interest:
All Treasure Hunting
Other than being beat up and worn, what do you see that's special?
 

AU Seeker

Bronze Member
Oct 14, 2007
1,240
796
South Carolina
Detector(s) used
E-Track, MXT, CZ6A
Primary Interest:
All Treasure Hunting
The color is off and no reeded edge weight is 5.63g
The color is off because it's a "clad" coin and seeing the wear of the faces of the coin means some of the clad has worn off.

The fact that it has a smooth edge accounts for the small weight lost from the edge being worn smooth.

It's diameter should be 24.30 millimeters, I'm sure if you checked it with an accurate set of calipers you'll find it measures less than that.

So all in all what you have is a worn 2000 P South Carolina quarter, it's not an error coin.
 
OP
J

J.sanchez1980

Tenderfoot
Jul 22, 2022
5
16
  • Thread Starter
  • Thread starter
  • #9
The color is off because it's a "clad" coin and seeing the wear of the faces of the coin means some of the clad has worn off.

The fact that it has a smooth edge accounts for the small weight lost from the edge being worn smooth.

It's diameter should be 24.30 millimeters, I'm sure if you checked it with an accurate set of calipers you'll find it measures less than that.

So all in all what you have is a worn 2000 P South Carolina quarter, it's not an error coin.
Thank you
 

Top Member Reactions

Users who are viewing this thread

Top