Best sand scoop for hunting in ocean

Sep 15, 2015
4
1
Bowie, Texas
Detector(s) used
Minelab Equinox 800
Primary Interest:
All Treasure Hunting
Can some of you more experienced folks help me with what kind of long handled sand scoop I should buy for beach hunting? Going to be for mostly hunting ocean beaches in/out of water. Thanks in advance! I really enjoy having you seasoned vets sharing what you’ve learned!
 

Upvote 0

cudamark

Gold Member
Top Banner Poster
Mar 16, 2011
13,218
14,539
San Diego
🥇 Banner finds
1
🏆 Honorable Mentions:
3
Detector(s) used
XP Deus 2, Equinox 800/900, Fisher Impulse AQ, E-Trac, 3 Excal 1000's, White's TM808, VibraProbe, 15" NEL Attack, Mi6, Steath 920ix and 720i scoops, TRX, etc....
Primary Interest:
All Treasure Hunting
That's kind of a personal choice. I've seen them all over the place and I've tried many different locations before deciding on my favorite. I mount mine on the back side, about half way between the basket and the end of the handle.
 

Shooting Star

Jr. Member
Mar 3, 2019
67
167
Southern California
Detector(s) used
Minelab Equinox 800
Primary Interest:
All Treasure Hunting
That's kind of a personal choice. I've seen them all over the place and I've tried many different locations before deciding on my favorite. I mount mine on the back side, about half way between the basket and the end of the handle.

Ok, so it's something I'm going to have to play around with. Why do you have it on the back side? I just placed the D-lift on my handle to get the feel of that, and it seems it works better if it is on the front side. I'm sure you had a good reason. Also, Sunspot threw in a straight bar lift for free, so I'm thinking of placing that right above scoop - to give me something sturdy to hold onto as I'm picking the finds out the scoop.
 

Molewacker

Bronze Member
Feb 9, 2015
1,537
2,552
Yacolt WA
Detector(s) used
EQ 800
Primary Interest:
All Treasure Hunting
May I add that I too am looking at long handled scoops - but one problem I am having is a size restriction. Both Oregon and Washington state parks state no scoop larger than a 6" x 8" with 1/2" holes min. So check rules in your hunting area before you buy!

PS I don't know if once you are in the ocean, you are past the park boundry. I'll call around and update this post.

HH all!
 

Bayoutalker

Sr. Member
Sep 30, 2012
360
326
Highlands, TX
Detector(s) used
Garrett AT Pro
Minelab Equinox 800
Primary Interest:
All Treasure Hunting
May I add that I too am looking at long handled scoops - but one problem I am having is a size restriction. Both Oregon and Washington state parks state no scoop larger than a 6" x 8" with 1/2" holes min. So check rules in your hunting area before you buy!

PS I don't know if once you are in the ocean, you are past the park boundry. I'll call around and update this post.

HH all!
That's interesting. I wonder what's the reason for that kind of restriction and what caused it. Inquiring minds want to know!
 

cudamark

Gold Member
Top Banner Poster
Mar 16, 2011
13,218
14,539
San Diego
🥇 Banner finds
1
🏆 Honorable Mentions:
3
Detector(s) used
XP Deus 2, Equinox 800/900, Fisher Impulse AQ, E-Trac, 3 Excal 1000's, White's TM808, VibraProbe, 15" NEL Attack, Mi6, Steath 920ix and 720i scoops, TRX, etc....
Primary Interest:
All Treasure Hunting
Ok, so it's something I'm going to have to play around with. Why do you have it on the back side? I just placed the D-lift on my handle to get the feel of that, and it seems it works better if it is on the front side. I'm sure you had a good reason. Also, Sunspot threw in a straight bar lift for free, so I'm thinking of placing that right above scoop - to give me something sturdy to hold onto as I'm picking the finds out the scoop.

I usually grid an area and find it easier to drag the scoop with the handle on the back side to leave grid marks. I also find it easier to "steam shovel" sand with the handle that way. Like I said, it's a personal preference thing. Try a few different locations and use what feels best to you.
 

Shooting Star

Jr. Member
Mar 3, 2019
67
167
Southern California
Detector(s) used
Minelab Equinox 800
Primary Interest:
All Treasure Hunting
I usually grid an area and find it easier to drag the scoop with the handle on the back side to leave grid marks. I also find it easier to "steam shovel" sand with the handle that way. Like I said, it's a personal preference thing. Try a few different locations and use what feels best to you.

That makes sense. It would be easier to drag the shovel if the handle is on the back side. I have the plastic D handle, and I discovered if it is not cranked down tight all the way, the handle can swivel around, to be used on the front or back side as needed.
 

ARC

Gold Member
Aug 19, 2014
37,264
131,664
Tarpon Springs
Detector(s) used
JW 8X-ML X2-VP 585
Primary Interest:
All Treasure Hunting
Not that it matters...

But I would destroy a stealth or the other stavo. heh

Casper...

You foam your handle yet ?
 

RTR

Gold Member
Nov 21, 2017
8,180
32,469
Smith Mt. Lake Va.
Detector(s) used
Teknetics Liberator
Falcon MD-20
***********
Blue Bowl
Angus MacKirk sluice
Miller Table
Primary Interest:
All Treasure Hunting
I find these metal 32" long,6"wide blade shovels work faster/easier than Any sand scoop. And a lot cheaper:) 002.JPG
 

ROBOTCOP13

Sr. Member
Jul 29, 2014
295
425
Primary Interest:
All Treasure Hunting
Scoop Porn

Different kinds of assist handles.
 

Attachments

  • IMG_0832.JPG
    IMG_0832.JPG
    44.7 KB · Views: 408
  • IMG_1619.JPG
    IMG_1619.JPG
    22.1 KB · Views: 408

ColonelDan

Hero Member
Jan 19, 2014
998
2,163
Central Florida
🥇 Banner finds
1
🏆 Honorable Mentions:
1
Detector(s) used
Deus II
Primary Interest:
Beach & Shallow Water Hunting
I’ve used Stealth scoops for years. Currently own the 920i and 720i; both with carbon fiber handles. The best in my opinion with a life time warranty.
 

Earlafindit

Jr. Member
Nov 19, 2009
61
91
Mid Atlantic Coast DE.
Detector(s) used
f75se,CTX3030, , Deus ,Excal blue 800 & 1000 , Manticore , TDI BeachHunter
Primary Interest:
Beach & Shallow Water Hunting
Used RTG scoops still have 2, 1 Stavr, 4 Stealth's, now using Xtreme scoop's , as now you can get not only 304 stainless like used in stealth's, but 316 Marine grade stainless , and soon with in 6 week's will offer a scoop in Titanium , setting NEW standard's on high end Stainless Steel Scoop's , and Titanium , Earl
 

Last edited:

GreenMeanie

Hero Member
Jun 3, 2006
714
309
TreasureTerrain.com
Detector(s) used
NOX 800
Primary Interest:
All Treasure Hunting
If you have the money XTREME Scoops Sand Shredder seems good.
If and when my home made scoop dies I am going to try one of those out.
 

CASPER-2

Gold Member
Jan 3, 2012
17,158
19,959
NEW ENGLAND
🥇 Banner finds
1
🏆 Honorable Mentions:
6
Detector(s) used
WHITE'S XLT, PI PRO, GARRETT 2500, 3- FISHER CZ21s, JW FISHER 8X
Primary Interest:
All Treasure Hunting
Not that it matters...

But I would destroy a stealth or the other stavo. heh

Casper...

You foam your handle yet ?

NAH...since i wear a mask and i am either in chin deep water - where i could get clunked by it floating or in some shallow spots where i squat and duck walk
where it can be better for it not t float too - if i drop to fan - especially in rocks or dead coral- i will just drop it off to the side
if i floated it i would have to tether it and i have had some close calls where i f i had it tethered - it might have been my demise
few years back i was hitting a R.I. beach - it was pretty calm and there were just some slow rollers coming in - my friend decided to stay in close
and i decided to get out as far as i could - got to chest deep and started to swing - had an RTg and was wearing a mask & snorkel
skies were pretty clear - sun was over my right shoulder and so was deeper water - i got a hit and started to scoop
all of a sudden the sun got blocked out and i turned to look and i got hit with a rogue wave - squashed me like a bug
knocked my mask & snorkel off and as i tried to stand the water went back out hard and fast and ripped the scoop from my hand
and sucked it into deep waters - had i had a tether on me - believe i would have been sucked out also
had my friend come out and mark the spot while i went and grabbed my Pi and another mask and went back out to find
that scoop - never did - the under tow was very strong and the bottom was packed fine sand with no obstructions
- beach slowly continually sloped out and i believe it went out till bottom flattened or it found some rocks or something
asked others over the yrs that frequent there if they ever got it or heard of anyone finding it - nope
 

CASPER-2

Gold Member
Jan 3, 2012
17,158
19,959
NEW ENGLAND
🥇 Banner finds
1
🏆 Honorable Mentions:
6
Detector(s) used
WHITE'S XLT, PI PRO, GARRETT 2500, 3- FISHER CZ21s, JW FISHER 8X
Primary Interest:
All Treasure Hunting
Casper I don’t see where the aluminum 2 piece rtg scoop with the ss tip is offered
i called them and had them make mine special but thought i saw it offered after they did mine
give them a call - they will do just about anything for you - just will be a few extra $
 

CASPER-2

Gold Member
Jan 3, 2012
17,158
19,959
NEW ENGLAND
🥇 Banner finds
1
🏆 Honorable Mentions:
6
Detector(s) used
WHITE'S XLT, PI PRO, GARRETT 2500, 3- FISHER CZ21s, JW FISHER 8X
Primary Interest:
All Treasure Hunting
Casper; Absolutely love reading your articles and the most recent on scoops (above) is one of your best. Recommend everybody check-out this one and his many other articles on metal detecting and what he has found in the past - gobs and gobs of gold and silver. What MD dreams are made of...
.:sleepy2::sleepy2::sleepy2:
its an older article - i know there are other newer scoops - the thing i want most to take away from it is - dont go cheap
I spent like $300 on cheaper models - some not shown cause they busted so bad i tossed them
i had blade put on my new one cause i hit a few clay bottoms that it cut thru better and a few spots with like a peat bottom
that made easier to cut thru too - it can cut thru seagrass too - got some old areas where all that is left is old dead tangle of
sea grass roots that took extra effort with other scoop - some of these spots i got good stuff from cause others gave
up on them - too hard to work for them
 

Earlafindit

Jr. Member
Nov 19, 2009
61
91
Mid Atlantic Coast DE.
Detector(s) used
f75se,CTX3030, , Deus ,Excal blue 800 & 1000 , Manticore , TDI BeachHunter
Primary Interest:
Beach & Shallow Water Hunting
Tenderfoot , it's been a few year's , but i had 2 of the 8x11 s with the SS lip , and grab handle's, on mine, it was 10 buck's for SS lip, 10 buck's for grab, you can specify were you want your grab handle placement , basically call to order , the last RTG now gone that i owned, was a SS 7x10 with grab , only kept the small 2 dry sand scoop's , enjoy your new scoop, Earl
 

ARC

Gold Member
Aug 19, 2014
37,264
131,664
Tarpon Springs
Detector(s) used
JW 8X-ML X2-VP 585
Primary Interest:
All Treasure Hunting
Casper... foaming the handle simply keeps it "upright"... stands up on its own... if you let go of the scoop it wont lay down to bottom and saves ya from bending and groping in non viz.
 

CASPER-2

Gold Member
Jan 3, 2012
17,158
19,959
NEW ENGLAND
🥇 Banner finds
1
🏆 Honorable Mentions:
6
Detector(s) used
WHITE'S XLT, PI PRO, GARRETT 2500, 3- FISHER CZ21s, JW FISHER 8X
Primary Interest:
All Treasure Hunting
Casper... foaming the handle simply keeps it "upright"... stands up on its own... if you let go of the scoop it wont lay down to bottom and saves ya from bending and groping in non viz.

I know... the way i hunt - i like to lay it down in certain areas and in certain situations - if i "foamed" it = i would lose that option
I usually will not stand upright in knee deep water or waist deep water
I will lay out and place scoop on bottom in my left hand and pull myself along the bottom ...that would be difficult if handle wanted to keep rising
also have been times when i needed to keep my machine on the bottom and will lay scoop across it to keep it there
I very rarely come across many non-viz spots - 99% wear a mask
our fresh water spots are clear and most of my saltwater ones are too - if i drop it i usually just lift it up with my foot
I had a target in Dom. Rep. that ended up being inside a dead reef - The signal kept reading over a flat part of a dead reef and and saw
a hole about a foot and a half away and wondered if target could have sank inside it and worked its way under the shelf - hole was filled with soft powder sand
- I had to lay my machine on the bottom and lay scoop across so i could hold onto the lip of the hole and fan with my other. My machine would have floated away
if i had to do it any other way - scoop might have too if "foamed" - long story short - i fanned all the way to the back of the hole - came to the surface and took
another breathe and went back under - i looked in and saw nice gold band wedged in the back with pieces of coral and broken shell - reached for it but could
not free it - got excited - i was only like 4 ft under the surface but felt like I was hunting 20ft on a ship wreck. Took one more breathe and went under again
and fanned hard and then wiggled it free - nice 18k band - Reason # 5 i wear a mask. Without a mask no one wouldve gotten it and even with a mask
-i think others would not have tried or may have given up on it thinking it way a sinker trapped in the coral.
I have had other situations where i needed my hands free and have done the same.
To each their own - what ever works for you :icon_thumleft:
 

Top Member Reactions

Users who are viewing this thread

Top