CAN SOMEONE HELP ME WITH THIS PIN!

outlaw007

Bronze Member
Joined
May 6, 2009
Messages
1,348
Reaction score
22
Golden Thread
0
Location
ILLINIOS
🏆 Honorable Mentions:
1
Detector(s) used
TESORO LOBO SUPERTRAQ , TESORO GOLDEN UMAX AND MINELAB EXCALIBUR
Primary Interest:
All Treasure Hunting
FOUND AT A BEACH WHERE MOST COINS ARE DATED IN THE 40'S, THANKS!
 

Attachments

  • P1020838.webp
    P1020838.webp
    17.3 KB · Views: 538
Upvote 0
Here you go, nice find by the way...




Large WW2 U.S. Army Officer Visor Hat Insignia , Unique Size
OffCapEagleLarge1var.JPG (66614 bytes) 1UMI-3. 2-1/2-inch wide x 2-3/4-inch high, oversize, very nicely detailed, gilt brass, WW2 Army officer visor hat insignia. Light signs of age; some of the gilt still remains; however, most of the gilt is worn or missing from age, leaving a bright, but very slightly tarnished brass base metal. The backside has a screw post with a brass, knurled edge, nut and a stabilizing pin behind each wing and is marked, “Acid Test, Gemsco.” Because U.S. officers were required to purchase their own clothing and insignia and because of the many different insignia manufacturers, there were numerous distinct variations of this particular insignia. A perfect piece to compliment a WW2 Army or Army Air Force officer visor hat. The eagle looks dramatically better in person than in the image. UNIQUE SIZE. Vg+. $30.00

ww2.webp
 
THANKS FOR THE HELP, BUT MINE IS ONLY 1" WIDE X 1 1/4 TALL!
 
Same pin, just a smaller size.
 
US Air Force Officer's Hat Pin - at that size something else of course, but that IS what the pin represents...
 

Users who are viewing this thread

Back
Top Bottom