✅ SOLVED Colt dragoon or something else?

67GTA

Sr. Member
Dec 3, 2017
252
316
Franklin, KY
Detector(s) used
Equinox 800 XP Deus 2 Vanquish 540
Primary Interest:
Metal Detecting
Found this at a homesite where I've found lots of 1850's-1870's relics. I've been trying to identify it as much as humanly possible. The only pistols I can find of that era that have the signature piece sticking out of the bottom of the barrel under the sights are the dragoon models. Looks to be 40-44 caliber. I'm afraid If I clean it, it will fall apart.
pistol.jpg
 

GoldieLocks

Bronze Member
Dec 28, 2019
1,075
1,122
Nevada
Primary Interest:
All Treasure Hunting
is there an actual nail sticking out of the top left side? Are you supposing that the handle was connected there?
 

Upvote 0
OP
OP
67GTA

67GTA

Sr. Member
Dec 3, 2017
252
316
Franklin, KY
Detector(s) used
Equinox 800 XP Deus 2 Vanquish 540
Primary Interest:
Metal Detecting
is there an actual nail sticking out of the top left side? Are you supposing that the handle was connected there?
No, that is the bottom of the business end of the barrel where the ram rod would have attached. Look up some pictures of a colt dragoon and you will see what I'm referring to.
 

Upvote 2

BAW

Full Member
Jul 19, 2020
107
327
Primary Interest:
All Treasure Hunting
Found this at a homesite where I've found lots of 1850's-1870's relics. I've been trying to identify it as much as humanly possible. The only pistols I can find of that era that have the signature piece sticking out of the bottom of the barrel under the sights are the dragoon models. Looks to be 40-44 caliber. I'm afraid If I clean it, it will fall apart.
View attachment 2034971
What do you mean by "signature piece" ? The small piece on the underside of the barrel is the loading lever latch. All percussion Colt revolvers had them except for the early Baby Dragoons and a few special-order 1849 models. The combination of round barrel and flat barrel lug does make it look like the barrel from one of the dragoon models. An exact length would make it easier to identify.
 

Upvote 1
OP
OP
67GTA

67GTA

Sr. Member
Dec 3, 2017
252
316
Franklin, KY
Detector(s) used
Equinox 800 XP Deus 2 Vanquish 540
Primary Interest:
Metal Detecting
The lever lug on the bottom of the barrel was what I was referring to. The barrel is round and exactly 8 inches long. Cleaned the red clay up a little and took a couple more pics. 20220703_194238.jpg 20220703_194220.jpg
 

Upvote 3

BAW

Full Member
Jul 19, 2020
107
327
Primary Interest:
All Treasure Hunting
8" barrels were used on later model dragoons and Model 1860 revolvers. Looking at the 2nd picture of the 2nd group of pictures you posted makes me wonder if the barrel lug is as flat as I thought it was. It seems to look like the streamlined contour of the M1860 barrels. If you compared pictures of Colt dragoon revolvers and Colt 1860 revolvers with your barrel you could probably tell which one it is.
 

Upvote 2
OP
OP
67GTA

67GTA

Sr. Member
Dec 3, 2017
252
316
Franklin, KY
Detector(s) used
Equinox 800 XP Deus 2 Vanquish 540
Primary Interest:
Metal Detecting
From what I can tell it looks like an 1860 Army model by the shape and size. I've found a couple other CW artifacts in that area. I think maybe a CW veteran lived there.
 

Upvote 2

gunsil

Silver Member
Dec 27, 2012
3,864
6,207
lower hudson valley, N.Y.
Detector(s) used
safari, ATPro, infinium, old Garrett BFO, Excal, Nox 800
Primary Interest:
All Treasure Hunting
It's a model 1860 Army, not a dragoon. GTA don't forget that a couple hundred thousand of these became army surplus soon after the war. The government sold them all cheap. Folks in rural areas used muzzle loaders right up into the early 1900s. They were cheap to buy, cheaper than cartridges to shoot, and worked perfectly well for hunting, target shooting and defense. I think my grandfather paid around $10 in the 1920s for the model 1860 I now have. It shoots just fine with a perfect bore.
 

Last edited:
Upvote 7

Top Member Reactions

Users who are viewing this thread

Top