🔎 UNIDENTIFIED Is this a musket ball?

dagwood67

Jr. Member
May 9, 2020
74
92
Rochester NY
Detector(s) used
Teknetics Patriot and Garrett AT Pro
Primary Interest:
All Treasure Hunting

Attachments

  • 8326E43D-EEC4-44D7-A28F-C27EAA3720EE.jpeg
    8326E43D-EEC4-44D7-A28F-C27EAA3720EE.jpeg
    814.2 KB · Views: 2,098
  • 762AF8C3-527A-4788-B340-5D7A5C36CEA2.jpeg
    762AF8C3-527A-4788-B340-5D7A5C36CEA2.jpeg
    879.2 KB · Views: 101
Solution
Here are some that show the sprue and the little dimple I assume forms as the lead cools, also varying degrees of oxidation. I feel very comfortable saying the op’s is a musket ball. Hopefully dropped because I doubt that ball would be very accurate coming out of the barrel with that sprue bouncing around.
88C0237E-E63A-423C-840A-FBCF0B669E14.jpeg

346A64F0-9519-4880-88AC-14158EA5C347.jpeg
1C3AEBFA-BB09-452E-A3A8-6C978DDF1408.jpeg
OP
OP
D

dagwood67

Jr. Member
May 9, 2020
74
92
Rochester NY
Detector(s) used
Teknetics Patriot and Garrett AT Pro
Primary Interest:
All Treasure Hunting
I agree it’s a ball without the sprue cut, but I’d say more than Likely early 1800’s based on odds… far more people then casting their own bullets than now but yeah you can’t tell for sure
Thanks - the site where I found it is almost all pre 1900 relics - mostly 1820-1880 with no relics later than 1910
 

Upvote 1

GoldieLocks

Bronze Member
Dec 28, 2019
1,075
1,122
Nevada
Primary Interest:
All Treasure Hunting
The mold like edge shown in one image doesn't go the full length of it's side. Are people sure its a musketball? The colors are mineral or pottery-like not metallic either?
 

Upvote 0

CRUSADER

Gold Member
May 25, 2007
40,820
45,226
ENGLAND
🥇 Banner finds
27
🏆 Honorable Mentions:
1
Detector(s) used
XP Deus II v0.6 with 11" Coil
Primary Interest:
All Treasure Hunting
The mold like edge shown in one image doesn't go the full length of it's side. Are people sure its a musketball? The colors are mineral or pottery-like not metallic either?
That's the colour Lead goes when it oxide's in the soil.

BUT, are you now saying its an eyes only find & not a find by the detector? Or are you saying it doesn't have a metallic look? (Because it does to me)
 

Upvote 1

Older The Better

Silver Member
Apr 24, 2017
3,090
5,696
south east kansas
Detector(s) used
Whites Eagle Spectrum
Primary Interest:
All Treasure Hunting
Here are some that show the sprue and the little dimple I assume forms as the lead cools, also varying degrees of oxidation. I feel very comfortable saying the op’s is a musket ball. Hopefully dropped because I doubt that ball would be very accurate coming out of the barrel with that sprue bouncing around.
88C0237E-E63A-423C-840A-FBCF0B669E14.jpeg

346A64F0-9519-4880-88AC-14158EA5C347.jpeg
1C3AEBFA-BB09-452E-A3A8-6C978DDF1408.jpeg
 

Upvote 4
Solution
OP
OP
D

dagwood67

Jr. Member
May 9, 2020
74
92
Rochester NY
Detector(s) used
Teknetics Patriot and Garrett AT Pro
Primary Interest:
All Treasure Hunting
Upvote 1

Gare

Gold Member
Dec 30, 2012
7,366
13,878
Canton Ohio Area
🏆 Honorable Mentions:
2
Detector(s) used
Presently using Deus 2's & have Minelabs, Nokta's Tesoro's DEus's Have them all . Have WAY to many need to get rid of some
Primary Interest:
All Treasure Hunting
Possibly a fishing sinker ?
 

Upvote 0

gunsil

Silver Member
Dec 27, 2012
3,864
6,207
lower hudson valley, N.Y.
Detector(s) used
safari, ATPro, infinium, old Garrett BFO, Excal, Nox 800
Primary Interest:
All Treasure Hunting
Musket by definition is a military long arm and the ball in question looks a little small for a musket. It is a round ball for a muzzle loading firearm for sure. Round ball covers all firearms so I think it is a better definition of any found ball, the one shown could even have been made for a pistol. The dimple in the bottom is a sign that the person casting the ball had the lead too hot. Having cast thousands of various size round balls, minie balls, and sinkers I am well versed in the vagaries of casting lead. I take all the old bullet found with my detector and melt them down for new balls or sinkers.
 

Upvote 1

TheCannonballGuy

Gold Member
Feb 24, 2006
6,529
13,001
Occupied CSA (Richmond VA)
Detector(s) used
White's 6000, Nautilus DMC-1, Minelab
Primary Interest:
Relic Hunting
Unfortunately, the lead ball's finder never told us its diameter measurement. Based on comparing this lead ball's size with the poster's thumbnail in the photo, I believe Gunsil is correct, it appears to be too small for use in a musket/longarm -- and therefore, it is a pistol ball. It looks to be smaller than 1/2-inch, but bigger than 1/3-inc. So I think it is most likely to be a .44-caliber pistol ball, with uncut casting-sprue. To see how the casting-sprue was formed, examine the 1840s-through-1860s Colt pistol's bulletmold in the photo below. Also, note that it made both a roundball and a conical bullet.
 

Attachments

  • Bulletmold_44Colt_openview.jpg
    Bulletmold_44Colt_openview.jpg
    39.9 KB · Views: 35
Upvote 1

Top Member Reactions

Users who are viewing this thread

Top