Just a thought. If you are not digging everything you are missing good targets no matter what detector you use. I never rely on vdi and could care less for it on any detector. To each his own. I would constantly second guess numbers on any detector as none are 100% accurate. I basically dig everything and nothing over 12” that consistency seems to do fine.For all you legend users, does not matter if you have done the 1.09 update or not. Have you noticed a problem with the TDI numbers?
Most of you will think I am full of crap, but this is what I have noticed.
THESE numbers are fictional but very close to the truth.
1st if there is more than 1 coin, say a quarter and a dime close to each other, the legend will only find 1 target until you remove the other. and to top that off it seems to round the numbers together, example if a dime and quarter are in the same hole, the legend will give me a 36 on the screen
2nd, a zinc penny does not always ring up as a 41-45, it sometimes rings up as a 31
3rd a dime might be a 45, and the next dime is a 39 or 36
What i am trying to say there is no consistency in how it identifies a coin.At first I thought I was imagining it, but now I have owned the Legend for 4 months and this happens over and over.
And it does not separate targets I had that problem with the Garrett Apex, sent it in for repairs and it was returned with the same problem.
and do not get me wrong I like the Legend, it has already proven itself to me (unlike the Apex) but so far I do think the Nox, even with its issues is a better machine, I do not own a D2, but would not give up my Deus to make the Legend my only machine.