Pro Pointer has to go back

badpenny

Sr. Member
Joined
Mar 28, 2013
Messages
456
Reaction score
171
Golden Thread
0
Location
NE PA
Detector(s) used
Garrett AT Pro
Primary Interest:
All Treasure Hunting
My Pro Pointer started acting up about a week ago, whenever I would place it in a hole, trying to locate a target, it would start its beeping and vibrating and just wouldn't stop. I held it over my head and it kept beeping and when I would lay it down it would emit a half hearted beep like it was taking its last breath. A quick search of the web revealed I am not alone either. Garrett had me send it back, I hope it gets fixed or better yet replaced so I don't have to deal with the problem any longer. But I sure miss not having it; it made locating a target faster. However, I dug a dozen or so holes yesterday without it and pulled out some nice coins, a few silver quarters, a wheat penny, some dimes and nickels too. And no bottle caps either... Only two questionable holes got dug which yielded some crap, I thought it would be crap but just wanted to be sure.
 

Switch went in mine. Less than two weeks I had a new one, that included shipping time to and from Michigan. They are great, you will be pleased! I bought a Harbor Freight special$17, till I got it back, they acually work ok, in a pinch
 

Last edited:
I worked with CS before and they are the best in the business as far as I am concerned, so I know it will be taken care of, but thanks for the words of encouragement.
 

metal_detector_vpnavy.gif
Regardless of the pointer - you might consider putting it in a ziplock bag (cut off excess and used a few pieces of scotch tape) to help protect the switch, speaker, etc.
 

Attachments

  • pointer.webp
    pointer.webp
    13.2 KB · Views: 183
Not a bad idea. I was thinking about putting tape over the speaker for sure but maybe I'll look for a tight fitting removable bag too. I know I didn't get it wet, but I did have it muddy a few times but NEVER up near the switch or speaker.
 

metal_detector.gif
I hated getting it dirty (one of my many hangups!) so covered it. Now, I just wipe it off after it gets all muddy. Baggie has absolutely no affect on the pointer.
 

You can also buy battery shrink tubing off ebay and encase it that way. Covers everything.
 

I have no intention of ever using it in water so that might not be a bad idea either.
 

Hey VP what size bag would it need to fit into? I see some 2 1/2 x 12 out there and was wondering if they are big enough? A quick check of the Garrett site gave me the dimensions but without the Pointer in hand I don't know if it would fit when I try to slide it in. Uline makes the bags.
 

I found some 3x24 shrink wrap on ebay. It's used for RC cars.

My son actually races RC cars and he might have some, send me the link regardless. Thx!
 

No Pro Pointer yet, Garrett told me it should be fixed and shipped by the end of Next week. Damn, I really miss that thing; it made life so much easier on that questionable ping. :0(

It arrived home, I will check it out layer today.
 

Last edited:
Just a side note. I'm looking to buy a pointer and was wondering what the range on pointer Pro is. I looked at the Whites and it was an inch. Not sold on that one. Thanks and HH. WH
 

Hello William, I never used a White detector so I am not familiar with them. However, I do own a Garrett and I can tell you it works great. I never tested how deep it goes so I can't give you a depth but I can tell you it does go deep though and if it tells you something is there, it's there.

I did receive mine back and it works great, as before.
 

Just a side note. I'm looking to buy a pointer and was wondering what the range on pointer Pro is. I looked at the Whites and it was an inch. Not sold on that one. Thanks and HH. WH

William, it depends on the size of the target. Penney/dime is about 1.5-2inches, larger targets go deeper. Garrett offers a two year warranty, we offer free US shipping right now on Pro-pointers. Give us a call if we can help you with your purchase.

Wayne

www.metaldetectingstuff.com
 

William, it depends on the size of the target. Penney/dime is about 1.5-2inches, larger targets go deeper. Garrett offers a two year warranty, we offer free US shipping right now on Pro-pointers. Give us a call if we can help you with your purchase.

Wayne

www.metaldetectingstuff.com

Thank you Wayne. I do believe I have found what I am looking for. Thank you for your help. HH
 

And back it goes again; it's still not right.
 

Man that's no good. Sorry to hear that. Hope they get it fixed this time. Good luck.
 

I'm sure they will; my guess the board is bad they changed the coil on it the last time and that didn't fix it.
 

Top Member Reactions

Users who are viewing this thread

Latest Discussions

Back
Top Bottom