would this pump work for a small dredge?

[CoastalSChunter]

would this pump work for a small dredge? or has anybody used one like this?
i seen somebody post about a pump they bought from harbor freight or northern, but i couldnt find the post.

http://www.harborfreight.com/2-clear...ine-68375.html

[sniffer]

if you look at the specs, that thing is pumping 151 gallons per minute, which is either a typo or a fantasy for that kind of money. besides that's way too much flow for a dredge, it would wash all your finds straight through and dump it out the back end.
the motor would work great, it's small and a 4 stroke just have to find a lower volume pump

[Hoser John]

I bought one off of craigslist to lend folks and NOT NEAR ENOUGH csi/gpm for anything bigger than a 2". It is a open flow and any restrictions-as a jet--kills it and that gpm is indeed a pipe dream. You must use solid hose as flexible also gives just too much to do and not enough psi to keep the hose rigid under most conditions as a general rule of thumb.. I've let quite a few folks use it and gone with them to my local claims as some folks need to know before they blow the dough. For my money I'd get a keene,proline,precision,dahlke or equivalent,but free to use and see ifn' it floats your boat---John

[beaks]

they are not perfect but they will work on a small dredge or highbanker.
saw tons of them working just fine at cache creek and along the arkansas river in colorado.

[Guest412]

It works fine as a trash type pump but not much more. For a dredge you need volume and pressure to make a venturi work. stick with standard dredge pumps or beat your head on the wall with less than satifactory results

[Nitro 54]

I use a 2" Blue Max, which is about the same thing here on my highbanker.. Works great for that. If you need lots of water pressure, this pump is not for you and only puts out 30 LBS. of pressure at max RPM..

[CoastalSChunter]

it says clear water pump, so i hope that it works as a dredge for me, i will have a sreen on the suction end of the hose, so we will see.

its hear already, man HF dnt play on shipping.

[russau]

goodluck!

[strickman]

I run a 3" clear water pump with a 3"x2" reducer on the high pressure side .It's stronger than before .

[beaks]

i use a 3" honda pump with my 5" subbie and it rocks and rolls (its not a dredge pump just an old water pump)

[Hoser John]

CSC are you talkn' the 1 1/2 hp and that'n looks to be what a 3-5 hp HP makes one heck of a difference and thats why I bought that 1 1/2 hp pump for a lousy $50 bill,to lend out so folks could know that lil'ol thing is jus' way tiny-John

[CoastalSChunter]

thanks strick
John, im not sure on the hp, i haven’t taken it out of the box yet, but it says its 212cc, i haven’t done the cc-hp conversion but i will take it out and look at it tonight. im just looking for something simple, to move a little more material than my hand dredge @ a continuous rate.

[beaks]

thats a 6.5 hp motor it will work for sure