GARRETT AT PRO FRESHWATER PREP?

[ATGoldGuy]

Do I need to do anything to my AT PRO before using in freshwater (other than submersible headphones)? I hear some talk about greasing connections?

 

Amazon Forum Fav 👍

Cry Of The Eagle: History And Legends Of The Cherokee Indians And Their Buried Treasure - Grab it through Amazon!

[John-Edmonton]

I would put some silicon based grease on the coil and headset connectors to the box. Make sure they are hand tight....don't use pliers. That's it!

Now go get some bling.

 

[badpenny]

What John said, any hardware store will have it; it is the one used for faucets.

 

[Metal Detecting Stuff]

And also use it on the battery compartment door. Rinse it off when you get home. Oh, and go dig some Jewelry!

Wayne

www.metaldetectingstuff.com

 

[Bart@Big Boys Hobbies]

I would put some silicon based grease on the coil and headset connectors to the box. Make sure they are hand tight....don't use pliers. That's it!

Now go get some bling.

Be careful and don't over due the grease. Applied to thick it will attract dirt and dirt cuts o-rings.

 

[perry2]

I have spent about 6-8 hours with the ATP under water with out any extra grease etc---no problems Perry

 

[ATGoldGuy]

Thanks everyone! I appreciate the assistance. Having a blast MDing!

 

[jackedliberty]

Let us know what you find!

 

[petey1231]

Attach it to a bungee and to your waist so doesn't float away

 

[petey1231]

Same with your scoop and siifter

 

[ATGoldGuy]

Good advice. Thank you